Trying to run a Layer 2 tunnel using Q-in-Q per the document here...https://www.juniper.net/documentation/en_US/junos14.1/topics/example/l2pt-ex-series-els.html .
It says that Q-in-Q must be enabled first. So I followed this document here... https://www.juniper.net/documentation/en_US/junos14.1/topics/task/configuration/qinq-tunneling-ex-series-cli-els.html
I'm using two EX4300 switches with Junos 14. When trying to enable the encapsulation in the document I get an error that states that "unit 0 - needs to have a VLAN ID assigned to it". When also enabling the bridge mode, the command is missing, there is no "family bridge" command.
When putting the commands as per the documents and doing commit I get the following...
[edit vlans v10 interface]
'ge-0/0/1.10'
interface with vlan-id-list/inner-list cannot be added to a vlan with a vlan-id/vlan-tags configured
[edit vlans v10 interface]
'ge-0/0/1.10'
interface with input/output vlan-maps cannot be added to a routing-instance with a vlan-id/vlan-tags configured
[edit vlans v10 interface]
'ge-0/0/1.10'
interface with vlan-id-list cannot be added to a vlan with a vlan-id/vlan-tags/vlan-id-list configured
error: commit failed: (statements constraint check failed)
Can any provide an updated easier to understand document or am I missing something per these documents? It doesnt say I need some come of special licensings. Any help would be greatly appreciated.