Hi all,
I am testing lab as the diagram show below:
The PC A transmit packet to PC B via switch with running vlan 99 and firewall SRX running transparent mode.
I have tested with EX 3200 switch and SRX210 firewall.
The goal of a test is traffic flow between PC A and PC B like the red line.
So I used command "firewall family ethernet-switching filter" in EX 3200 switch with options then is "interface" in order to force traffic go to srx transparent but it doesn't work
root@ex3200-1# set firewall family ethernet-switching filter FWF1 term T10 then ?
interface Switch traffic to the specified interface by-passing switching lookup - (Ingress only)
The traffic flow run directly from PC A to PC B not go through srx transparent mode
I have tested ping and add firewall family ethernet-switching filter count and monitor interface in switch for verifying
Anybody can help me to solve this problem.
Thanks