Re: EX3300 can't disable xe-2/3 for VC.

---

spuluka wrote:

I'm a little confused now over the exact nature of the current problem.

 

I assume this switch was a member of a VC and now is not.

You are trying to use the old XE VC port as a normal XE port.

 

What seems to be confusing is which port we are talking about your title has xe-2/3 which I assume is xe-0/2/3

your command in first post has xe-0/1/3

 

But in any case the VC command do show that no interface is currently setup as a VC port.

 

So I think the next step is to verify that your interface is seen:

Does the interface show up using 

show interfaces terse xe-#/#/#

this will verify that the device sees your hardware on the expected port

 

Is the optics module recognized:

port xe-0/2/3

show chassis pic fpc-slot 0 pic-slot 2 

or make pic slot 1 if the interface is xe-0/1/3

 

are there optics data

show interface diagnostics optics xe-0/2/3

---

Hi, spuluka.

I assume the main problem is my poor english. sorry.

No, this switch had never been member of VC  -it's standalone switch.

ports xe-0/1/0 and xe-0/1/1 are in use from the first day and xe-0/1/2 and xe-0/1/3 was empty until now.

and I'm talking about those ports and here is no any xe-0/2/x ports.

here is output:

 show chassis hardware
Hardware inventory:
Item             Version  Part number  Serial number     Description
Chassis                                GD0213446061      EX3300-24T
Routing Engine 0 REV 14   750-034299   GD0213446061      EX3300 24-Port
FPC 0            REV 14   750-034299   GD0213446061      EX3300 24-Port
  CPU                     BUILTIN      BUILTIN           FPC CPU
  PIC 0                   BUILTIN      BUILTIN           24x 10/100/1000 Base-T
  PIC 1          REV 14   750-034299   GD0213446061      4x GE/XE SFP+
    Xcvr 0       REV 01   740-031838   APF13400061JH0    SFP+-10G-CU5M
    Xcvr 1       REV 01   740-031838   APF1337006976L    SFP+-10G-CU5M
    Xcvr 3       REV 01   740-030077   APF13360028MY0    SFP+-10G-CU3M
Power Supply 0                                           PS 100W AC
Fan Tray                                                 Fan Tray

this is problem port

 Xcvr 3       REV 01   740-030077   APF13360028MY0    SFP+-10G-CU3M

today I've rebooted the switch, but no luck.

 show interfaces terse xe-0/1/3
Interface               Admin Link Proto    Local                 Remote
xe-0/1/3                up    down
xe-0/1/3.0              up    down eth-switch

show chassis pic fpc-slot 0 pic-slot 1
FPC slot 0, PIC slot 1 information:
  Type                             4x GE/XE SFP+ Builtin
  State                            Online
  Uptime                         13 hours, 50 minutes, 47 seconds

PIC port information:
                         Fiber                    Xcvr vendor       Wave-    Xcvr
  Port Cable type        type  Xcvr vendor        part number       length   Firmware
  0    10GBASE CU 5M     n/a   Amphenol           584990006         n/a      0.0
  1    10GBASE CU 5M     n/a   Amphenol           584990006         n/a      0.0
  3    10GBASE CU 3M     n/a   Amphenol           584990002         n/a      0.0

 show interfaces diagnostics optics xe-0/1/3
Physical interface: xe-0/1/3
    Optical diagnostics                       :  N/A