Re: Juniper EX 4600 and 4300 Virtual Chassis

Hi,

I've configured a cluster of 4600 and 4300. all of them are in the same version 14.1X53-D30.3

{master:0}
root> show virtual-chassis status

Virtual Chassis ID: 16cb.9c39.daaa
Virtual Chassis Mode: Mixed
                                                Mstr           Mixed Route Neighbor List
Member ID  Status   Serial No    Model          prio  Role      Mode  Mode ID  Interface
0 (FPC 0)  Prsnt    TC3715360031 ex4600-40f     255   Master*      Y  VC   1  vcp-255/0/24
                                                                           2  vcp-255/0/25
1 (FPC 1)  Prsnt    PE3715170212 ex4300-48t     255   Linecard     Y  VC   0  vcp-255/1/0
                                                                           2  vcp-255/1/1
2 (FPC 2)  Prsnt    PE3715170178 ex4300-48t     128   Linecard     Y  VC   1  vcp-255/1/0
                                                                           0  vcp-255/1/1

Everything seemed fine until i tried

> show chassis alarms

but i got the result that no alarms were up, which is weird because the alarm leds in the EX4300 are on.

Also when i try to connect to any ethernet interface on EX4300 the link isn't working like i wasn't connecting anything.

Has someone been through that? if so how do i need to check?

Regards.

Giulianna