Hello All
I appreciate if you can let me know the above subject.
(EX Switch)
set interfaces vlan unit 10 family inet address 10.0.10.101/24
set interfaces vlan unit 10 family inet address 10.0.100.1/24 primary
(Cisco Switch)
interface Vlan10
ip address 10.0.10.102 255.255.255.0 secondary
ip address 10.0.100.2 255.255.255.0
Cat3850#ping 10.0.10.101
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.0.10.101, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/10 ms
Cat3850#
Cat3850#ping 10.0.100.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.0.100.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/10 ms
Cat3850#sh ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
10.0.10.101 128 FULL/DR 00:00:38 10.0.100.1 Vlan10
*OSPF neighbor it is non-secondary IP Only whtch I know.
Are there any impact when EX configures Secondary IP?
Are there any secondary IP sepecification information which maximum secondary IP and so on?
Best Regards,
Masanobu Hiyoshi
↧
Any impact when EX Switch configures Secondary IP address for a Vlan.
↧