Hi all,
I would like check with you guys if I have done the best configuration for following scenario.
descr:
I have 10 sources (servers) which are connected to an ex4300 for port aggregation.
The uplink from ex4300 is connected to the pim-router.
In the ex4300 I have only activated igmp-snooping.
In the pim-router I have activated PIM and IGMP.
Every thing work, but I'm not sure it is the right way
Everything is getting a little backward.
In most cases, you have layer2 switches after query router against all receivers.
When I do show command in the layer2 switch for igmp-snooping, all senders respond to igmp query messages.
Can I do a better configuration so the L2 switch knows how to send all multicast traffic to the pim router without sending query message?
Thanks Niklas