rccpgm wrote:All working? If not, need whole config.
So, I did not run the "delete vlans default" command.
Based on the results below, it looks like there are 2 link aggregation interfaces tied to vlan 0. These are the uplinks to my pfSense router/firewall. Are the ports used in the link aggregration still tied tyo vlan 0 and not vlan 1? Please advise on what to do to correct this issue.
root> show vlans 0 extensive
VLAN: __juniper_vlan_internal__, Created at: Mon Aug 7 23:24:07 2017
Internal index: 7, Admin State: Enabled, Origin: Static
Protocol: Port Mode, Mac aging time: 0 seconds
Number of interfaces: Tagged 0 (Active = 0), Untagged 2 (Active = 0)
ae1.0*, untagged, trunk
ae2.0*, untagged, trunk