Hello,
I have two EX4300s configured as VC. But when I check the VLANs, I don't see all the information about Switch1 ports. Switch 1 is the backup switch.
Is there any command to check the backup switch?
user@EX4300-2> show virtual-chassis
Preprovisioned Virtual Chassis
Virtual Chassis ID: 23dc.bf78.2698
Virtual Chassis Mode: Enabled
Mstr Mixed Route Neighbor List
Member ID Status Serial No Model prio Role Mode Mode ID Interface
0 (FPC 0) Prsnt xxx ex4300-24t 129 Backup N VC 1 vcp-255/1/0
1 (FPC 1) Prsnt xxx ex4300-24t 129 Master* N VC 0 vcp-255/1/1
{master:1}
user@EX4300-2> show vlans
Routing instance VLAN name Tag Interfaces
default-switch Internet 999
ge-0/0/1.0
ge-0/0/11.0
ge-0/0/12.0
ge-0/0/15.0
ge-0/0/2.0
ge-0/0/21.0
ge-0/0/5.0
ge-1/0/1.0
ge-1/0/11.0
ge-1/0/12.0
ge-1/0/14.0
ge-1/0/2.0
default-switch default 1
ge-0/0/0.0
ge-0/0/10.0
ge-0/0/13.0
ge-0/0/14.0
ge-0/0/16.0
ge-0/0/17.0
ge-0/0/18.0
ge-0/0/19.0
ge-0/0/20.0
ge-0/0/22.0
ge-0/0/23.0
ge-0/0/3.0
ge-0/0/4.0
ge-0/0/6.0
ge-0/0/7.0
ge-0/0/8.0
ge-0/0/9.0
{master:1}
user@EX4300-2>The Backup switchport are not showing either.
krishna@EX4300-2# set interfaces ge-1?
Possible completions:<interface-name> Interface name
ge-1/0/1 Interface name
ge-1/0/11 Interface name
ge-1/0/12 Interface name
ge-1/0/14 Interface name
ge-1/0/2 Interface name
{master:1}[edit]Any help would be appreciated!