Good time gentlemen!
We are going to purchase this switch, I have a question regarding the operation of the mirror (analyzer)
ethernet-switching-options {
analyzer COPM {
input {
ingress {
interface ae3;
interface ae4;
interface xe-0/0/12;
interface xe-0/0/13;
}
}
output {
interface {
xe-0/0/11.0;
}
}
}
ethernet-switching-options {
analyzer DPI {
input {
ingress {
interface ae3;
interface ae4;
interface ge-0/0/14;
interface ge-0/0/15;
}
}
output {
interface {
xe-0/0/10.0;
}
}
}Will this configuration work here? I need to do a mirror traffic with mixed ports of the source in different destination ports in several analyzer sessions.
I read the https://www.juniper.net/documentation/en_US/junos/topics/concept/port-mirroring-ex-series.html#port-mirror-terminology and https://kb.juniper.net/InfoCenter/index?page=content&id=KB21200 but I do not fully understand