Re: EX4300 switches not joining Virtual Chassis

I don't know why the VC ports are showing Abesent in the second switch. DAC cable is connected to the QSPF port in the switch.

First switch:

user@EX4300-2> show virtual-chassis vc-port    
fpc0:
--------------------------------------------------------------------------
Interface   Type              Trunk  Status       Speed        Neighbor
or                             ID                 (mbps)       ID  Interface
PIC / Port
1/0         Configured         -1    Down         40000
1/1         Configured         -1    Down         40000
1/2         Configured               Absent  
1/3         Configured               Absent  

{master:0}

--------------------------------------------

Seconds switch:

user@EX4300-2> show virtual-chassis vc-port
fpc1:
--------------------------------------------------------------------------
Interface   Type              Trunk  Status       Speed        Neighbor
or                             ID                 (mbps)       ID  Interface
PIC / Port1/0         Configured               Absent
1/2         Configured               Absent
1/1         Configured               Absent

{linecard:1}
user@EX4300-2>