Re: Configuring EX4200 default static route to cable modem

Thank you, Smicker. 

That statement gave me traction that I needed to get started.  I've been up all night fighting this switch, and I'm almost there.  All of my hosts are pulling IPs from the pool that I configured  - but no web access.  I entered the next hop from the routing table below (76.111.40.1) and a google DNS to advertise to clients, but no luck.

root@SWITCH# run show route detail

inet.0: 8 destinations, 8 routes (8 active, 0 holddown, 0 hidden)
0.0.0.0/0 (1 entry, 1 announced)
        *Access-internal Preference: 12
                Next hop type: Router, Next hop index: 1328
                Address: 0x27542bc
                Next-hop reference count: 3
                Next hop: 76.111.40.1 via ge-0/0/23.0, selected
                Session Id: 0x2
                State: <Active Int>
                Age: 2:46:24
                Validation State: unverified
                Task: RPD Unix Domain Server./var/run/rpd_serv.local
                Announcement bits (2): 0-KRT 2-Resolve tree 1
                AS path: I

Any ideas as to what I'm doing wrong?

My config is attached.

Thanks in advance.