Trying to connect our COLO with our DSO location.
We have connectivity from our Corporate site to our COLO site, both directions work great.
I am unable to ping the DSO from the COLO. Any reason why.?
Below are the interface setups;
CORPORATE to COLO
ge-1/0/39
access
vlan-id 9
layer-3 vlan.10
gateway ip: 10.11.9.254/24
COLO to CORPORATE
ge-0/0/9
access
vlan-id 9
layer-3 vlan.2
gateway ip: 10.20.9.254/24
COLO to DSO
ge-0/0/33
access
vlan-id 9
layer-3 vlan.2
gateway ip: 10.20.9.254/24
DSO
ge-2/0/0
access
vlan-id 9
layer-3 vlan.10
gateway ip: 10.10.9.254/24
Showing LLDP Neighbors, from either COLO or DSO shows the switch on the opposite end.
{master:0}
admin@COLOSW01> show lldp neighbors
Local Interface Parent Interface Chassis Id Port info System Name
ge-0/0/9.0 - 00:a0:c8:e8:8e:aa giga-eth 0/2: MAC:PQIII TSEC1 Gigabit Ethernet Phy (BCM5482 v.11.2) gm93093
ge-0/0/33.0 - 80:ac:ac:ad:89:40 Uplink to COLOSW01 ge-0/0/33 DSOSW01
ge-0/0/18.0 ae1.0 f4:b5:2f:95:f0:80 Uplink to COLOSW2-18 COLOSW03
ge-0/0/19.0 ae1.0 f4:b5:2f:95:f0:80 Uplink to COLOSW1-19 COLOSW03
Routes on COLO
set routing-options static route 0.0.0.0/0 next-hop 10.20.9.252 set routing-options static route 10.10.0.0/16 next-hop 10.20.9.252
It is possible the route to 10.10.0.0/16 is the problem, as that is going to our Level-3 MPLS cloud.
Routes on DSO
NONE
