LLDP-MED-ByPass

Hello Community,

I am stood for an issue and I dont know where it is coming from.

We use Steel-Belted Radius on our dot1x where on some ports an IP-Phone and a PC connects thought the IP-Phones switch port .For only PC ports on our EX3400 all is woring well but when we use the IP-Phones switchports our issues start as they are not configured for 802.1x Auth. So we created a static list of MACs and a VLan binding where the phone should be moved to, to operate. This is a  bit of a tidious work.

user@juniper# show
00:04:13:71:5b:XX/48 {
    vlan-assignment 12;
}

This is a  bit of a tidious work.

I found this:

https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/lldp-med-bypass-edit-protocols.html

And was jumping for joy however it does not work. The IP-Phone starts and in deed becomes the LLDP-MED V-Lan ID passed and reboots. But still it is not added to the static list to bypass and is stuck in connecting state.

ge-2/0/0.0    Authenticator  Authenticated   54:EE:75:AB:02:XX    DOMAIN\Administrator
ge-2/0/0.0                   Connecting      00:04:13:74:02:XX    No User

Where am I going wrong? Thx in advanced!