Quantcast
Channel: All Ethernet Switching posts
Viewing all articles
Browse latest Browse all 10307

Re: Shutdown EX9204

$
0
0

Hi Smicker,

 

I quickly tested on MX as well and i dont see the option apprearing. i did some research and found that this is a Software BUG but this is fixed on 17.4R2 and 17.4R1 that is the reason for karand it works fine when he Checked on 17.4R1.

 

Next you can test in 17.2R* latest release and you see the issue then you can directly raise a JTAC case to fix in 17.2R* release.

If the issue doesnot appear in latest 17.2R* release then we can consider it is fixedo n 17.2R* throttle as well.

 

Model: mx80
Junos: 17.2R1.13
JUNOS Base OS boot [17.2R1.13]
JUNOS Base OS Software Suite [17.2R1.13]

labroot@chicago> request system power-off ?
Possible completions:
<[Enter]> Execute this command
at Time at which to perform the operation
in Number of minutes to delay before operation
media Boot media for next boot
message Message to display to all users
| Pipe through a command
labroot@chicago> request system power-off

 

 

regards

Vadivelan V

 

Hope this helps
--------------------------------------------------------------------------------------------------------
If this post was helpful, please mark this post as an "Accepted Solution".
Kudos are always appreciated!
--------------------------------------------------------------------------------------------------------


Viewing all articles
Browse latest Browse all 10307

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>