Could you explain what you mean by setting the write MAC address. My show interface are sowing MAC address for all xe interfaces on vmware, I am just not sure how to conenect vqfx's router via xe interfaces and be able to ping. I apriciate it f you could explain this to me.
root@vqfx-re# run show interfaces xe-0/0/1
Physical interface: xe-0/0/1, Enabled, Physical link is Up
Interface index: 649, SNMP ifIndex: 512
Link-level type: Ethernet, MTU: 1518, LAN-PHY mode, Speed: 10Gbps, Duplex: Full-Duplex, BPDU Error: None, Loop Detect PDU Error: None, MAC-REWRITE Error: None, Loopback: Disabled,
Source filtering: Disabled, Flow control: Disabled, Media type: Fiber
Device flags : Present Running
Interface flags: SNMP-Traps Internal: 0x4000
CoS queues : 8 supported, 8 maximum usable queues
Current address: 02:05:86:71:53:07, Hardware address: 02:05:86:71:53:07
Last flapped : 2018-03-15 14:29:26 UTC (1d 22:20 ago)
Input rate : 0 bps (0 pps)
Output rate : 0 bps (0 pps)
Active alarms : None
Active defects : None
Interface transmit statistics: Disabled