Quantcast
Channel: All Ethernet Switching posts
Viewing all articles
Browse latest Browse all 10307

Re: Trunk between Juniper EX4200 & Cisco 2960X disconnect randomly?

$
0
0

Hi AshvinO

I managed to remove vlan1 from vlan members on trunk so I now have vlan1 Untagged (before I had vlan1 tagged and untagged??)

I run commands you say and get this

 

aromay@AGC-IDF-CORE-PR> ... interfaces ge-1/0/8 detail
Interface: ge-1/0/8.0, Index: 122, State: up, Port mode: Trunk
Native vlan: VLAN1
Ether type for the interface: 0x8100
VLAN membership:
VLAN1, 802.1Q Tag: 1, untagged, msti-id: 0, unblocked
VLAN-CORE, 802.1Q Tag: 100, tagged, msti-id: 9, unblocked
VLAN-DGFE, 802.1Q Tag: 114, tagged, msti-id: 11, unblocked
VLAN-USIP-TECNICOS, 802.1Q Tag: 120, tagged, msti-id: 23, unblocked
Number of MACs learned on IFL: 3

 

aromay@AGC-IDF-CORE-PR> show spanning-tree bridge

STP bridge parameters
Context ID : 0
Enabled protocol : RSTP
Root ID : 32768.00:21:59:cb:b6:41
Hello time : 2 seconds
Maximum age : 20 seconds
Forward delay : 15 seconds
Message age : 0
Number of topology changes : 12945
Time since last topology change : 3057 seconds
Topology change initiator : ge-1/0/8.0  ------>interfase juniper connected to Gi5/0/1 trunk on Cisco
Local parameters
Bridge ID : 32768.00:21:59:cb:b6:41
Extended system ID : 0
Internal instance ID : 0

STP bridge parameters
Context ID : 1
Enabled protocol : RSTP

 

STP bridge parameters for VLAN 120---->one of the vlans configured both sides of trunk cisco and juniper
Root ID : 32888.00:21:59:cb:b6:41
Hello time : 2 seconds
Maximum age : 20 seconds
Forward delay : 15 seconds
Message age : 0
Number of topology changes : 13762
Time since last topology change : 3165 seconds
Topology change initiator : ge-1/0/8.0------>interfase juniper connected to Gi5/0/1 trunk on Cisco
Topology change last recvd. from : 38:20:56:11:24:01
Local parameters
Bridge ID : 32888.00:21:59:cb:b6:41
Extended system ID : 23
Internal instance ID : 0

STP bridge parameters
Context ID : 24
Enabled protocol : RSTP

 

STP bridge parameters for VLAN 100---->one of the vlans configured both sides of trunk cisco and juniper
Root ID : 32868.00:21:59:c8:e6:41
Root cost : 22000
Root port : xe-5/1/1.0
Hello time : 2 seconds
Maximum age : 20 seconds
Forward delay : 15 seconds
Message age : 2
Number of topology changes : 30624
Time since last topology change : 3322 seconds
Topology change initiator : ge-1/0/8.0------>interfase juniper connected to Gi5/0/1 trunk on Cisco
Topology change last recvd. from : 38:20:56:11:24:01
Local parameters
Bridge ID : 32868.00:21:59:cb:b6:41
Extended system ID : 9
Internal instance ID : 0

STP bridge parameters
Context ID : 10
Enabled protocol : RSTP

 

STP bridge parameters for VLAN 114---->one of the vlans configured both sides of trunk cisco and juniper
Root ID : 32882.00:21:59:cb:b6:41
Hello time : 2 seconds
Maximum age : 20 seconds
Forward delay : 15 seconds
Message age : 0
Number of topology changes : 13855
Time since last topology change : 3393 seconds
Topology change initiator : ge-1/0/8.0------>interfase juniper connected to Gi5/0/1 trunk on Cisco
Topology change last recvd. from : 38:20:56:11:24:01
Local parameters
Bridge ID : 32882.00:21:59:cb:b6:41
Extended system ID : 11
Internal instance ID : 0

STP bridge parameters
Context ID : 12
Enabled protocol : RSTP

show spanning-tree interface detail

 

Interface name : ge-1/0/8.0
Port identifier : 128.585
Designated port ID : 128.585
Port cost : 20000
Port state : Forwarding
Designated bridge ID : 32768.00:21:59:cb:b6:41
Port role : Designated
Link type : Pt-Pt/NONEDGE
Boundary port : NA
Edge delay while expiry count : 20101
Rcvd info while expiry count : 0

 

then

 

aromay@AGC-IDF-CORE-PR> show ethernet-switching table interface ge-1/0/8
Ethernet-switching table: 2 unicast entries
VLAN MAC address Type Age Interfaces
VLAN-CORE * Flood - All-members
VLAN-CORE 00:90:f5:e4:08:5f Learn 0 ge-1/0/8.0
VLAN-DGFE * Flood - All-members
VLAN-USIP-TECNICOS * Flood - All-members
VLAN1 * Flood - All-members
VLAN1 38:20:56:11:24:01 Learn 0 ge-1/0/8.0

{master:4}


aromay@AGC-IDF-CORE-PR> configure
Entering configuration mode

{master:4}[edit]
aromay@AGC-IDF-CORE-PR# run show ethernet-switching interfaces ge-1/0/8
Interface State VLAN members Tag Tagging Blocking
ge-1/0/8.0 up VLAN1 1 untagged unblocked
VLAN-CORE 100 tagged unblocked
VLAN-DGFE 114 tagged unblocked
VLAN-USIP-TECNICOS 120 tagged unblocked

 

so it seems now is all ok?

I mean, Several minutes passed and I still get connected

 

do you see any problem?

 

thanks

 

 

 

 


Viewing all articles
Browse latest Browse all 10307

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>