Sorry, I'm used to other brand switches so i'm having a hard time figuring this out. I have my firewall connected on port 0/0/0 and it is the DHCP server. It is a flat network, no vlans. Our firewall is our DHCP server. Our network is 10.10.10.x/24. THe firewall is 10.10.10.1
I need to make it so all the ports can give out DHCP from the firewall. I want to assign an IP address to the switch. I tried to assign it to 0/0/0 and it said I couldn't due to the ether family. So I tried set interfaces me0 unit 0 family inet address 10.10.10.5/24
When I try to set the default gateway it vives me that message about family ethernet-switching mutual exclusive thing.
I can't even ping 10.10.10.5 from the switch I've set the me address on!
My goal is to be able to use the jweb interface and ping the switch from 0/0/0 but still be able to pass traffic to the workstations so they can get dhcp addresses.