Re: How to setup tagged vlans with 802.1x authentication on Juniper EX3300 switch

hi Karol,

 You may use the following KB as a reference for vlan assignment

https://kb.juniper.net/InfoCenter/index?page=content&id=KB12688&cat=SRX_650&actp=LIST

 This doc also describes how to set ArubaClearPass for the same type of authentication (some of the sections may be ignored):

https://www.juniper.net/documentation/en_US/release-independent/nce/topics/example/nce157-example-aruba-dot1x-mac.html