Hi,
Could you check:
show mpls lsp name to-SPB-REP extensive
show mpls lsp name to-SPB-REP-2 extensive
and look for the last record route [ | match "record route" to filter]
Both LSPs may be using the same path.
Below command:
show route forwarding-table family inet destination 10.255.0.3/32
may be more appropriate than filtering with match as some outputs may be filtered out.
Can you also do a show "show ospf interface"
For inet load-balance, 2 types in forwarding-table would be expected: ulst & ucst
Cheers,
Ashvin