Re: RVI in Private VLAN on EX3400
Thank you for your reply lyndidon, but Im trying on only one switch
View ArticleRe: CPU Clock Component Issue on Affected Juniper Devices (Intel Atom C2000...
The official note is TSB17030 - https://kb.juniper.net/InfoCenter/index?page=content&id=TSB17030&smlogin=true&actp=search ThePRODUCT AFFECTED:MPC7E-10G MPC7E-MRATE MX2K-MPC8E MX2K-MPC9E...
View ArticleRe: CPU Clock Component Issue on Affected Juniper Devices (Intel Atom C2000...
That is super news!! Good to hear!!
View ArticleRe: RVI in Private VLAN on EX3400
ok I see. Could you show this output?show vlans klient1 extensiveOne thing i would like to see from your test.remove or deactive the irb. then ping host 1 on klient1 from host on klient2activate the...
View ArticleRe: RVI in Private VLAN on EX3400
I found this for EX4300, whose syntax should be same as that for EX3400. This is without IRB but at least this should help you get the L2 PVLAN stuff set-up right, if other posting is accurate:...
View ArticleRe: RVI in Private VLAN on EX3400
I have already checked it. Without L3 interface IRB on primary vlan those devices in different communities don't see each other. The thing is that i need routing between community vlans. I have got VC...
View ArticleOuput drops on ex3300/ex4200 after upgrading to 15.1R5.5
Hi J-net. After upgrading several our ex3300/4200 chassiss we've got increasing output drops on "ge" interfaces. user@switch> show interfaces ge-0/0/25 extensive | match Drops: Errors: 0, Drops: 0,...
View ArticleRe: CPU Clock Component Issue on Affected Juniper Devices (Intel Atom C2000...
Yeah, Intel really messed up on this one. Cisco had the misfortune to use this chip on a LOT of devices. Luckily for us Juniper only had this on a limited set. Still waiting for the other shoe to...
View ArticleRe: Ouput drops on ex3300/ex4200 after upgrading to 15.1R5.5
There are 12 open PR for 15.1R5.5 with drop conditions listed....
View ArticleRe: Remote port mirror configuration for JUNIPER EX-switch and Cisco switch
It is unbelievable how many restrictions there are in Juniper compared to Cisco: - Ex4300 RSPAN Vlan destination is supported, but traffic is sent out only on _one_ interface. Which one is not...
View ArticleRe: RVI in Private VLAN on EX3400
Sorry very confused by your latest statements. If you want routing/communication between the communities why are you using PVLAN in the first place? Is the idea that communities can only talk to each...
View ArticlevQFX10k 15.1X53-D60 3 BUGS on MC-LAG (one fatal) :(
Parser bug for redundancy-group unlike the QFX5k the vQFX10k needs the redundancy-group and redundancy-group-list settingif omitted you get a cryptic commit error: error: Failed Reading Default...
View ArticlePPPoE through flexible-ethernet-services
Hi all, I need some guidance here. Here is my setup: PPPoE Client Router ----> SW1 -----> R1 ------> R2-BRAS I want to use the BRAS at R2 to terminate my PPPoE session from the PPPoE...
View ArticleDot1x / MAC-Based Authentication issues on a EX2200 with 100BaseEthernet Devices
Hi everybody, I have some issues with 100BaseEthernet devices on a EX2200 with activated MAC-Based Security on specific Ports.When I connect a device with a 100Mbit Ethernet on a dot1x-Port the device...
View ArticleSSH Access External
Seeing alot of china SSH attempts to my external inet inet 2200. Have root login denied but dont even want to see them trying... Trying to set up a firewall filter and not having much luck. What am I...
View ArticleRe: SSH Access External
I think you need to apply this to the interface where the ip address is located. set interfaces ge-0/1/0 unit 0 family inet filter input local_acl
View ArticleEx4600 'Error in: SBUS transaction.'
Hi all, Not able to find much on this one but I am seeing a reoccuring log entries on one member of a 2 Node ex4600 Chassis. Any help would be greatLog as followsFeb 23 09:57:38 swi-02 fpc1...
View ArticleEX3300 can't disable xe-2/3 for VC.
Hello.I need to use all four 10Gb port as network ports.so I'd disabled xe2/3 as VC ports but link is still downroot@ex3300# run show virtual-chassis Virtual Chassis ID: 492c.d68c.639c Virtual Chassis...
View ArticleRe: EX3300 can't disable xe-2/3 for VC.
Is this the procedure you are using to remove the port as a VC link? https://kb.juniper.net/InfoCenter/index?page=content&id=KB17821 Is there another link still active to keep the VC traffic...
View ArticleRe: EX3300 can't disable xe-2/3 for VC.
Assuming you mean xe-0/1/3, you can run show chassis hardware to confirm that the installed optic is recognized. If so you'll then want to check the cabling and its polarity as well as that of the end...
View Article