Quantcast
Channel: All Ethernet Switching posts
Browsing all 10307 articles
Browse latest View live

Re: Storm Control Config SRX

You can use the feature explorer to what feature are supported on ech product and the version of code requred.storm-control is a feature of  the EX, MX, ACX QFX series - devices with the...

View Article


Re: Unable to open J-Web in EX-3200

Can you show configuration system services?

View Article


Re: How to Begin Troubleshooting Slow Network Issues

To know for sure we would need to see the topology of the connections between the host and computer being backed up.   But from your description, I assume the router in question is in the layer 2 path...

View Article

Re: Unable to open J-Web in EX-3200

Till now I am unable to do that. I can see in configuration , We are using JUNOS 10.4R5.5  Configuration :version 10.4R5.5;system { host-name RB; time-zone Asia/Dili; root-authentication {...

View Article

Re: Unable to open J-Web in EX-3200

HI Can you also please check https://kb.juniper.net/InfoCenter/index?page=content&id=KB16427 Second in shell please run command ps -aux | grep http and check1) http running2) http-gk running If not...

View Article


Re: How to Begin Troubleshooting Slow Network Issues

HIFor slow network issues I would approach1) Check link drops , errors, CRC, Physical Layer.2) Check CPU utilization on both peers.3) Check STP state. (See if there is any fluctuation)4) Check COS/QOS...

View Article

Re: EX4550 not learning MAC-Address

Did you ever resolve this? I have the exact same issue and my entire lab is down because of it. Thanks!

View Article

Can ex-sfp-10ge-sr be used on MX240?

Can ex-sfp-10ge-sr be used on MX240? Thank you

View Article


Re: ip-source-guard/dhcp security blocking lease renewals

Just an update of sorts. This work in code version 16.1r4 and earlier it appears. But not in 17.1. In 17.1 it builds the dhcp snooping table but doesn't ever see the client renewing/rebinding and so...

View Article


Re: EX9200/MX: MC-LAG to MC-LAG

I'm attempting to do the same with two pairs of EX9204's in an MC-LAG configuration but to support an L3 mc-ae.  I'm running into the ae interface being able to operate properly let alone the L3...

View Article

Re: A QinQ problem with QFX5100

Try this:  set interfaces ae31 flexible-vlan-tagging set interfaces ae31 mtu 9216 set interfaces ae31 encapsulation extended-vlan-bridge set interfaces ae31 unit 3174 vlan-tags outer 3174 set...

View Article

urgent EX 4200 Mirroring question

Hi We have a EX 4200 swicth which is attached to a router. th elink is point to point layer three link (routed mode on EX). I need to mirror the outgoing tarffic from EX to router. Is it psosible i...

View Article

SNMP traps not out from Juniper EX4600 Switch

Dears, I configured snmp on Juniper EX4600 Switch to send snmp traps from EX4600 irb.590 "10.58.253.130" to NetAct on "10.7.192.199" dst-port 262 but we cannot find any snmp traffic “out” of the switch...

View Article


Re: ip-source-guard/dhcp security blocking lease renewals

As stated earlier. It seem to be a code issue. Turns out that the data vlan works just fine. Its the voice vlan that is not updating the dhcp-security binding table. 

View Article

Re: How to Begin Troubleshooting Slow Network Issues

Really would need to see your topology and configs. 

View Article


Guest internet firewall filter

I have an EX2200 running 12.3R12 to which i'm trying to apply some filters at layer 3. vlan 100 is bound to L3 interface unit 100 with ip 192.168.1.254/24. I want to prevent any 192.168.1.X clients...

View Article

Re: Guest internet firewall filter

set interfaces vlan unit 100 description guest set interfaces vlan unit 100 family inet filter input guest-to-internet-only set interfaces vlan unit 100 family inet filter output no-corp-to-guest set...

View Article


Integrate DPI with Juniper MX

Hi All,Need your support how to integrate dpi boxes with mx routers as below Description:- dpi used as L2 manner between two interfaces at mx router (hairpin used here one interface as internal with...

View Article

Re: urgent EX 4200 Mirroring question

See if this helps https://kb.juniper.net/InfoCenter/index?page=content&id=KB10878

View Article

Re: Integrate DPI with Juniper MX

Hi, A network diagram might be helpful to understand.However, for hairpin I believe you may have to logically separate the 2 next-hops [internal v/s external], either with routing-instances [virtual...

View Article
Browsing all 10307 articles
Browse latest View live