Re: MAC Limiting EX2200
user@switch# set switch-options interface interface-name persistent-learning
View ArticleRe: EX4300 Port Security - MAC Limiting (Allowed MAC) & ELS
Different hierarchyuser@switch# set switch-options interface interface-name persistent-learning set interface interface-nameinterface-mac-limitlimit packet-action <action>Better yetLimiting the...
View ArticleRe: EX9200 MC-LAG Failover Recovery Times
I have no experience with that technology, however do you have the latest version?Starting with Junos OS Release 14.2R3 on MX Series routers, enhanced convergence improves Layer 2 and Layer 3...
View ArticleRe: EX 2200 switch with EX-1FE-FX SFP module
Hi guys, I have exactly same issue on EX2200-48T-4G and tried several Junos vesions (12.3R11.2 and 14.1X53-D44.3).Did anyone sort this out? Thanks.
View ArticleClik here to view.
Re: EX 2200 switch with EX-1FE-FX SFP module
Unfortunately, I haven't any progress in this problem Regards.Aleksey Dragunov.
View ArticleRe: EX 2200 switch with EX-1FE-FX SFP module
Alex, I've tried several Junos at the moment, but no luck:11.4R12.412.3R11.214.1X53-D44.315.1R5.5 In all cases the switch see SFPP, but link still down with any ether-options combinations. I have 2...
View ArticleRe: MCLAG to MCLAG
Hi,thank you but this is not what I want to do. I'm not using Logical System.All my QFX10002 are in "standalone".
View ArticleRe: Monitor LACP
LACP SNMP MIBS .1.2.840.10006.300.43.1.2.2.1.1 (dot3adAggPortStatsLACPDUsRx) (/var/run/lacpd-17) .1.2.840.10006.300.43.1.2.2.1.2 (dot3adAggPortStatsMarkerPDUsRx) (/var/run/lacpd-17)...
View ArticleRe: MCLAG to MCLAG
HI For the top 2 switches and bottom two switches run normal MC LAG configs. From bottom switch to up swithces the lag config would be normal LACP nothing else. For example Topology +-------------+...
View ArticleClik here to view.
igmp-snooping vlan disable - ex4300
Hi All,i need to disable igmp-snoopong on spesific vlan on ex4300 sw.as i undrestand that option isnt available on that sw model: for now is connfigured as default :"set protocols igmp-snooping vlan...
View ArticleRe: EX9200 MC-LAG Failover Recovery Times
Hello @srinireddy, I will try to make those changes but I have a few questions: For the iccp settings, you don't specifiy redundancy-group-id-list settting. Is this not needed? Here is what I...
View ArticleRe: EX9200 MC-LAG Failover Recovery Times
Hi, I'm currently running 17.2. Can you elaborate on how enhanced convergence is obtained on L2/L3 interfaces? As an update to the situation, this is the progress so far: 1) For software upgrade,...
View ArticleRe: Q-in-Q QFX 5100
Hi Partha i m trying to configure qinq wiith QFX5100 and MX. its not working; i tried many example given on juniper.net but no result, even i try your given example its not working with me. attached is...
View ArticleRe: Qfx-3500
Hi, Even I am having the same error. I have a virtual chassis configured in my QFX3500. I did a zeroize but still when I login using a console port it tries to login to the master..login to master...
View ArticleUnable to SSH to EX4200 and no local logs
I have an EX4200 in a remote location that I can't access via SSH. Luckily, telnet was still enabled so I can access the box. The is absolutely nothing in the messages log file on the box. Anyone...
View ArticleRe: Unable to SSH to EX4200 and no local logs
Hi, Can you please check following: 1. Is the SSH service configured [edit system service]?2. Is there any lo0 filter which is blocking SSH?3. When you initiate SSH from your PC or any server, can you...
View ArticleRe: Unable to SSH to EX4200 and no local logs
I am more concerned that telnet is enabled on a production box that is accessible remotely. I know you did not ask, but that is extremely insecure! And it should be disabled. Enable ssh for your user...
View ArticleRe: Unable to SSH to EX4200 and no local logs
enable ssh services: set system services sshif you use root user to login, please enable: set system services ssh root-login.BTW, root user is not recommanded.
View ArticleICCP QFX10002
Hi,I want to configure ICCP/ICL. I use this configuration :root@SD-SRV-C012-1# show ## Last changed: 2017-06-30 08:35:25 UTC version 15.1X53-D62.5; system { host-name SD-SRV-C012-1; root-authentication...
View ArticleICCP goes down when enabling aeX mc-ae lag option
Hi, bevause VC isn't support yet on QFX5110, we decided to setup the 2 QFX5110 in MCLAG topology. I have successfully been able to bring up the ICCP link beetween both switch, but as soon as I enable...
View Article