Clik here to view.
MCLAG Distribution Access QFX
Hi, my network : I've configured ICCP/ICL with lo0, my ICCP is established.I've configurer MCLAG between all my access switches, it's seem to work correctly. SD-SRV-C012-1 config:root@SD-SRV-C012-1>...
View ArticleRe: False fan LED status on QFX5200?
I am facing the same issue just after upgrading to 15.1X53-D230. Did you find solution for this yet? When Upgraded to 15.1X53-D230, it also has system alarm- "jbs for node locked licenses needed for...
View ArticleRe: DHCP-Relay + firewall on interface
I managed to resolve the problem.. at little. Packets i wanted to filter:Source: 0.0.0.0 (0.0.0.0) Destination: 255.255.255.255 (255.255.255.255) User Datagram Protocol, Src Port: bootpc (68), Dst...
View ArticleRe: False fan LED status on QFX5200?
HIThis was supposed to be fixed in D210 , can you open a TAC case https://prsearch.juniper.net/PR1217426 ThanksPartha
View ArticleRe: EX 2200 switch with EX-1FE-FX SFP module
HI This SFP doenst seem to be supported. ThanksPartha
View ArticleClik here to view.
Re: EX 2200 switch with EX-1FE-FX SFP module
Hi, Partha, you can find "EX-SFP-1FE-LX" on the page you provided as supported SFP on EX2200. Partha wrote:HI This SFP doenst seem to be supported. ThanksPartha
View ArticleRe: False fan LED status on QFX5200?
Hi Partha, Thanks for your reply.I hope the issue reolved in D210 is bit different than what I am facing...In that case, we had System Alarm on the cli which get cleared automatically in next poll.But...
View ArticleRe: ICCP goes down when enabling aeX mc-ae lag option
Yes I am using IRB for iccp connectivity. Prior converting aeX to mc-ae lag option, I am able to have connectivity beetween both node. I ping both node in either way. Yes I did disable RSTP on the ICL...
View ArticleRe: EX 2200 switch with EX-1FE-FX SFP module
Your subject, picture, and part number shows EX-1FE-FX but your diag output shows EX-1FE-LX. Port Cable type type Xcvr vendor part number length Firmware0 GIGE 100LX SM FINISAR CORP FTLF1217P2BTL-J1...
View ArticleNative VLAN id on Juniper
Hi all, I want to clarify something on native VLAN on Juniper vendor. First of all, I know that by default Juniper do not have specific VLAN number for native VLAN. In my circumstance,I create two VLAN...
View ArticleRe: Native VLAN id on Juniper
set vlans VLAN_100 vlan-id 100 set vlans VLAN_200 vlan-id 200== CASE 1 set interfaces ge-0/0/0 unit 0 family ethernet-switching port-mode trunk set interfaces ge-0/0/0 unit 0 family ethernet-switching...
View ArticleRe: Rogue DHCP server
Sorry its not clear from the Juniper document; are entries "set ethernet-switching-options secure-access-port vlan VLAN arp-inspection" and "set ethernet-switching-options secure-access-port vlan VLAN...
View ArticleClik here to view.
Re: False fan LED status on QFX5200?
Hi Ishaan, Looks like problem that you are reporting is resolved in version 15.1X53-D231 by PR1274312. https://prsearch.juniper.net/PR1274312 Thanks,Raj MaradiaJTAC-Switching Platforms
View ArticleICCP and ICL requirement
HI, I am trying to understand the purpose and how ICCP and ICL link are use and if both are really need? As per the following article, my understanding is the configuration is done using only one one...
View ArticleRe: ICCP and ICL requirement
HI Both scenarios are valid 1) Single ICL/ICCP link2) Seperate ICL/ICCP link ICL = Used for Data traffic between the MC-LAG peersICCP = To exchange control information to for MC-LAG RegardsPartha
View ArticleRe: ICCP goes down when enabling aeX mc-ae lag option
HI Paul Post converting can you ping each other? Let me send you an example of working config Topology +-------------+ et-0/0/48 +--------------+ | 5100 A +--------------+ 5100 B |...
View ArticleClik here to view.
Re: igmp-snooping vlan disable - ex4300
HI Sorry for delay. First delete the statement of vlan all and just add the vlans for which you need snooping. Does this help?ThanksPartha
View ArticleRe: vQFX10k 15.1X53-D60 on ESXi Installation and Running with up to 10...
Hi Alexander, Thanks for your post. I tried to install the vqfx-RE and vqfx-pfe on the workstation. I was able to boot the RE but on the PFE I am getting the error "Inappropriate ioctl for device"....
View Article