MAC address associates with ae0.0 instead of physical interface
I have multiple MC-LAG deployments at an extreamly large site. Occasionally I need to track a MAC address to an access port, so I get the MAC assosicated with the devices IP address off of my firewall...
View ArticleRe: MAC address associates with ae0.0 instead of physical interface
Because they are on a different access switch and are being learned from your core.
View ArticleRe: MAC address associates with ae0.0 instead of physical interface
I just saw your username lol. If you look up the MAC on core1/mdf1a first it will show you the ae interface of the correct access switch. If it shows up on ae0.0 there it means it’s being learned from...
View ArticleL2 connection between Juniper MDF and Meraki MX
Experts, Meybe you can help here: I have all vlan set on Juniper MDF and one vlan (DMZ) set up on meraki MX security applinace. All DMZ hosts are connected to MX with access port and VLAN10 (DMZ vlan)....
View ArticleRe: L2 connection between Juniper MDF and Meraki MX
Since you are extending plain L2 between MX and Ex 3300, you will not be needing any routing.You can just pass same vlan across meraki mx, ex 4300(mdf) an ex 3300 over trunk ports.Make sure that, your...
View ArticleEX2200 (Junos 15.1R6.7) Routing-instance doesn't work?
Hello.trying to implement RI at EX2200 show configuration | display set set version 15.1R6.7 set system services ssh protocol-version v2 set system syslog user * any emergency set system syslog file...
View ArticleRe: EX2200 (Junos 15.1R6.7) Routing-instance doesn't work?
Hi WingDog, It it's not recommended to run Junos releases newer than 12.3 on the EX2200-platform due to memory limitations. Ref:...
View ArticleClik here to view.
Re: EX2200 (Junos 15.1R6.7) Routing-instance doesn't work?
Hi, jonashauge.I've upgraded from 12.3R12 just to test RI at 15.1 because it doesn't waork at 12.3 anyway I'll rollback now =)
View ArticleClik here to view.
Disabling DHCP trapping
Hi Team, Iam facing issues on EX2300 running on Junos 15.1X53-D56.Certain interfaces will not learn mac addresses and others will not pull an IP from DHCP. The resolution is to reboot the switchDuring...
View ArticleRe: Disabling DHCP trapping
couple of queries.1. Which device is the dhcp server in the network? (i.e. juniper ex 2300 or any other devices)2. Have you enable dhcp snooping in your netwok?3. Is there any core file generated on...
View ArticleMC-LAG with 4 leafs
Is there a way to configure MC-LAG with 4 leaf nodes under same MC-LAG id in IPClos Fabric? I believe ICL is established through SPINEs for these leafs however if I want to be having VRRP, I should...
View ArticleEX2200 (Junos 12.3R12.4) Routing-instance doesn't work?
Hello.trying to implement RI at EX2200 show configuration | display set set version 15.1R6.7 set system services ssh protocol-version v2 set system syslog user * any emergency set system syslog file...
View ArticleRe: EX2200 (Junos 15.1R6.7) Routing-instance doesn't work?
Hi WingDog, It it's not recommended to run Junos releases newer than 12.3 on the EX2200-platform due to memory limitations. Ref:...
View ArticleClik here to view.
Re: EX2200 (Junos 15.1R6.7) Routing-instance doesn't work?
Hi, jonashauge.I've upgraded from 12.3R12 just to test RI at 15.1 because it doesn't waork at 12.3 anyway I'll rollback now =)
View ArticleRe: EX2200 (Junos 15.1R6.7) Routing-instance doesn't work?
now Junos 12.3R12.4 and nothing changed.any ideas?
View ArticleRe: EX2200 (Junos 15.1R6.7) Routing-instance doesn't work?
Your config will not work. Not sure exactly what you needs are but Routing-Instances MUST include interfaces, at a minimum, if you want traffic to work within a routing-instance. I believe...
View ArticleRe: EX2200 (Junos 15.1R6.7) Routing-instance doesn't work?
this config work at SRX.I'm trying to catch traffic from specific subnet and change route for it.
View Article