Quantcast
Channel: All Ethernet Switching posts
Browsing all 10307 articles
Browse latest View live

Re: dual-side mc-lag with QFX 5100

Configs are attached.  I pulled out the authentication and login details, as well as the default storm control on the access ports. I did notice the AE device count was not the same, fixed it, didn't...

View Article


Re: dual-side mc-lag with QFX 5100

The core configs look okay,which makes me think its downstream on the edge switches. Do you see the behavior with none of the edge switches connected? What does one of the edge switch configs look...

View Article


Re: dual-side mc-lag with QFX 5100

Thx. I have noticed that you use the same lacp system-id on both sides of ae1? Shoudn't they be different between the core and agg switches?

View Article

Image may be NSFW.
Clik here to view.

Re: dual-side mc-lag with QFX 5100

The LACP system-id is a globally-unique value for the benefits of remote partners forming a LAG with a given actor. In my case it so happens that I actually do have different id’s but I changed them in...

View Article

Re: dual-side mc-lag with QFX 5100

testing with a single server, and the mgmnt switch, results in a storm facing any active portsw01b Seconds: 56 Time: 00:30:20 Interface Link Input packets (pps) Output packets (pps) gr-0/0/0 Up 0 (0) 0...

View Article


Re: dual-side mc-lag with QFX 5100

Are the server’s two uplinks configured with LACP or is it just bridging the traffic?

View Article

Re: EX4550 QinQ ethertype 0x88a8 unknown

Hi Thank you for the reply, I found the same article before I posted on this forum.  I am running 12.3R12.4 on both virtual chassis and the recommend version from JTAC is 12.3R12-S10/15.1R7 (Though I...

View Article

Re: EX2300-C which license for VC

This statement actually does not match what Junipe Sales has told us.  Only the routing-engines require a VC license per the rep. I worked with.  The Line-cards do not require a VC-license.

View Article


Re: EX2300-C which license for VC

As I'm working for a Juniper disti and handles these kind of orders/questions on a daily basis I can disqualify this statement. When looking at internal documentaton and ordering guides it's clearly...

View Article


Re: EX2300-C which license for VC

In general, EX Access switch licenses are only required on 2 members of any VC - Master and Backup.  EX2300 is a special case where for VC/etc. license is needed on every member of the VC. The current...

View Article

QFX3500 log errors: brcm_nh_l3_hw_uninstall, brcm_nh_bdvlan_ucast_uninstall,...

Hello, we have this strange logs:dc-pfe: BRCM_NH-,brcm_nh_l3_hw_uninstall(),1140:ucst nh:1966 uninstall failed for the hw idx:100109 Operation still running dc-pfe:...

View Article

Re: QFX3500 log errors: brcm_nh_l3_hw_uninstall,...

Look like next-hop delete is happening before the route pointing to it is deleted.Do you have any functional impact?

View Article

Re: dual-side mc-lag with QFX 5100

Xenserver 7.6 - lacp for just the management interface.  no guests active.

View Article


Re: dual-side mc-lag with QFX 5100

Can you attach output for the four switches?show lldp neighborsshow iccp brief show interfaces mc-aeshow lacp interfaces extensive

View Article

Re: EX3400 Large VC Stability

EX4300 choice is probably wiser.

View Article


Re: QFX3500 log errors: brcm_nh_l3_hw_uninstall,...

Yes, trafice is lost on 1-3 seconds on some ports at the same time as errors occurred, but not all. We are trying to find out why.

View Article

Image may be NSFW.
Clik here to view.

Re: default vlan on trunk interface

This works for me !!! 3. Try to define the VLAN-ID 0 as the native-vlan for the trunk interface (set interfaces ge-0/0/21 unit 0 family ethernet-switching native-vlan-id 0)  

View Article


802.1x et Wake on Lan

Has somebody a working solution for the following problem.Our administrator uses System center configuration manager (1810) with Wake on Lan for software deployment.on our Ex we use dynamic vlan...

View Article

Spanning Tree config with Routing Instances?

I have VSTP confiured on a EX4600 that has multiple routing instances.  I have VSTP configrued at what I assume is the global switch level (ie "edit protocols vstp") and it appears to be working fine....

View Article

Enable voip on just ports with phones or every port?

Our edge closets have stacks of EX4200 switches. These switches have printers, desktop computers, WiFi access points, security cameras, and HVAC equipment plugged into them. We have separate...

View Article
Browsing all 10307 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>