Re: VC not showing neighbor
Maybe the default VCP configuration for EX4300 members 0 and 2 got changed somehow? Suggest you get the output of: show virtual-chassis vc-port all-members And if need be follow step 10 from...
View ArticleRe: VC not showing neighbor
Hi, Could you check for:show virtual-chassis device-topology all-members show virtual-chassis vc-port all-membersCheers,Ashvin
View ArticleRe: VC not showing neighbor
rccpgm/ AshvinO - thank you and please see below. > show virtual-chassis vc-port all-members fpc0:--------------------------------------------------------------------------Interface Type...
View ArticleRe: VC not showing neighbor
Maybe a HW problem with either FPC0 interface 1/1 or FPC2 interface 1/0? I assume you are using QSFP+ DAC cables for these connections and you said you already tried a different cable. How about...
View ArticleRe: How to add or remove multiple VLANs from few interfaces without using...
You could just name the vlan with their id, only constraint is that there has to be at least one character. Then use the description to show what the vlan is for. Then you can refer to a number. jh@fw#...
View ArticleRe: VC not showing neighbor
long story short, unit 2 switch was replaced recently and since then fpc0 1/1 shows down. The only changes to config was the serial number for preprovisioned. Ill have to get a maintenance window to...
View ArticleRe: VC not showing neighbor
Hi, Some of the things you could dig into further to look for any transitiions and anomalies in receive v/s processed & drops:show virtual-chassis protocol adjacency detail show virtual-chassis...
View ArticleRe: [QFX5100] dhcp-relay options
Hi, need more information to solve an issue. Many factors could be the cause of problem. 1. Are these IRB interfaces lying in inet.0 routing table or has it's own instance? 2. Are servers correctly...
View ArticleRe: [QFX5100] dhcp-relay options
Please, look at this topic - https://forums.juniper.net/t5/Ethernet-Switching/QFX5100-JUNOS-13-2X51-D36-1-Bootp-relay-configuration-example/td-p/277418
View ArticleEx 4300 VSTP no interface all blows up config .. no Interface Range for AE?
Hey since the EX 4300 uses the ELS, the syntax is a little bit different from what im used to from the ex 2200 and ex 3300 configs.I want to setup VSTP on a EX4300-32f VC which has 45 LAGS (ae0-ae45)...
View Articlejunospace upgrade and one switch cant format alterante
hello I post in junospace area but this may have something to do with the switches we have been upgrading this with juno space for the last month and no issues, now all the switched are failing the...
View ArticleRe: VC not showing neighbor
I have not tried reconfig port yet. root@> show virtual-chassis protocol adjacency detail fpc0:--------------------------------------------------------------------------ec3e.f790.27c0...
View ArticleRe: connecting EX4300 VC to EX4600 non-VC
I went back to a non-AE/LACP configuration. I have done 3 logical switches with (2) 8208s and a VC of QFX5100s. In that setup, I (2) uplinks from each switch member going to the each 8208. This...
View ArticleRe: VC not showing neighbor
I had to reseat fpc0 1/1 and status UP but still does not show under vc status master:0}root@> show virtual-chassis vc-port all-members...
View ArticleRe: VC not showing neighbor
Hi, Were you able to re-configure the vcp port. This would probably be the next step to re-configure the vcp port on both members now that the port is Up. Cheers,Ashvin
View ArticleRe: Ex 4300 VSTP no interface all blows up config .. no Interface Range for AE?
Hi, Maybe you could use groups for this.Example:groups { vstp { protocols { vstp { vlan <*> { interface ge-0/0/0; interface ge-0/0/1; interface ge-0/0/2; interface ge-0/0/3; } } } } } protocols...
View ArticleRe: junospace upgrade and one switch cant format alterante
Please let me know the Code that you are gooing to upgrade ThanksAmit
View ArticleUseful Steps to recover from a Loader prompt ( Loader>)
Steps to recover from a Loader prompt ( Loader> )There may be situations if a unit has failed to load the kernel during boot process and displays the...
View ArticleRe: Useful Steps to recover from a Loader prompt ( Loader>)
step 13 is not correct !!!! Take care you are requesting a reboot and start from the alternate partition !!! 13. Run command # run request system reboot slice alternate to get the new version of Junos...
View ArticleRe: junospace upgrade and one switch cant format alterante
Hi, Could you run "show system storage partitions" to check on which partition this switch has booted from and the available partitions. Cheers,Ashvin
View Article