Re: Junos support for IEEE 1905.1 ?
The ex2200 has no wireless capability so your only option is to connect via ethernet. I don't follow exactly how the three devices are being connected to create the layer 2 loop. Since you have two...
View ArticleRe: CoS on QFX irb
Hi I'm a bit late to respond here, but I think since you cannot put the scheduler-map on the IRB interface or it's units, you need to put it on more phyiscal interfaces. Same as you already did for...
View ArticleRe: QFX5100 interface is always down
Hi If for each server you have 2 links towards the switch and one is up and another is down then i would suggest to check the following:1. Compare the cable/optics of the working link with the non...
View ArticleClik here to view.
Re: Junos support for IEEE 1905.1 ?
Hi and thanks for your answer. I'll try to make things as clear as I can In the "Deco M5.jpg" attachment shows a pretty good view of my network setup. The Deco M5 units are capable of choosing between...
View ArticleRe: J-web issue with too many redirects & phone-home
Hello: It seems that command is hidden on 18.1R3.3. Have you tried to enter the command without tab. It seems that you need to type it completely. Like this: #delete system phone-home server...
View ArticleClik here to view.
Re: QFX5100 interface is always down
A piece of information to add here, From the server, I try to run dhclient eno1 # eno1 is the interface linked on the server linked to that switch portI cleared the statistics on the switch side for...
View ArticleClik here to view.
Re: QFX5100 interface is always down
Hi yassine_fadh1, Yes, the input packets were seen previously as well, and another difference I can think of is the auto-negotation in the configuration you shared. Could you try disabling the...
View ArticleClik here to view.
Re: QFX5100 interface is always down
yeah the default config is auto-negotiation disabled just for the sake of test I enabled it for a while. Below is the confirmation of disabling the auto-negotiation:mtu 1500; ether-options {...
View ArticleRe: QFX5100 interface is always down
And if you unplug a server's 'up' interface does its 'down' interface come up? It sounds like simple active/passive server-side interface bonding.
View ArticleRe: J-web issue with too many redirects & phone-home
Hello Thethakuri, I have seen this issue before and was fixed removing the jphone-home package. Try this command and let me know if it works. request system software delete jphone-home Regards, Randall.
View ArticleRe: QFX5100 interface is always down
Thank-you @smicker for hoping to put this on right path. @yassine_fadh1 without knowing how the server 'bonding' is set-up, everything else is a complete quess. I suspect (with 99+% confidence) that...
View ArticleClik here to view.
Re: J-web issue with too many redirects & phone-home
In the switch that had phone-home issue, I was able to get rid of that but when I login to J-Web, it right away says the "Your Session has expired." I tried Firefox and Chrome and same issue, it just...
View ArticleRe: J-web issue with too many redirects & phone-home
It worked to get rid of phone-home in the other switch.But in the switch with too-many-redirect issue, it doesn't allow tab or space after phone-home. If I copy and paste, this is what I get...
View ArticleRe: J-web issue with too many redirects & phone-home
Maybe try just delete system phone-home <CR>. Does that complete? Then commit confirm.
View ArticleRe: distance on optic
Hi all,any idea about what is advantage or disadvantage of the BiDi SFP when compering other 10G SFP that for 80km?
View ArticleRe: distance on optic
BiDi optics use a single fiber to connect between devices while standard optics require two fibers. Note this means that with BiDi the transmit and recieve run on the same fiber so they have two...
View ArticleRe: J-web issue with too many redirects & phone-home
Hello I am assuming that the core switch is not another EX2300, can you tell what platform and Junos version it is running. Instead of copy and paste have you tried to type the entire command? On the...
View ArticleRe: Firewall filter, need a little help
Hendorson ,Request you to share the configuration you have done to resolve this.
View ArticleEX4600 warranty and SFPs
Hello all, Hope All is well, I need to assure from the below if any one could help.- Does EX 4600 come with no ports , in other words ( 48 port empty ) we shall order separaetly the SFPs which...
View ArticleRe: EX4600 warranty and SFPs
Just got a few 4600's myself... Yes, all the ports are empty. You will need to buy additional SFPs to match the cabling that you want to run (eg DAC cables, SFM, MMF, RJ45, whatever). I'm not aware of...
View Article