Re: ae11 inactive - how to activate again
looks like set interfaces ge-0/0/16 ether-options 802.3ad lacp force-up worked I did same thing for ge-/2/0/14 and now ae11 up up is there any other work around? Or this lacp force-up is just fine ?
View ArticleRe: ae11 inactive - how to activate again
Hi, aggregated-ether-optionsminimum-links is not a necessary config. If you have 2 child interfaces and one of them is up then the ae interface should be up after removing minimum-links config.
View ArticleRe: EX2200 Host 0 Boot from backup root
Hi, Thanks for an option. I'll try this one during next maintenance period. I will install JTAC recommended software version - Junos 12.3R12
View ArticleRe: virtual chassis with high CPU consume
Hi, Yes, there's aggregated interfaces run on this switch.And about run a shell and monitor the sfid process, I havn't done that before, do you know where I can find a guide?Thanks.
View ArticleRe: QFX 5100 Unstable even after latest version
We are experiencing the same issue on four standalone QFX5100 switches. I opened case the following case number.2016-1017-0260
View ArticleRe: QFX 5100 Unstable even after latest version
FROM JTACHi Richard, My name is Vishal from Juniper TAC team. I have taken the ownership of this case. As per the case notes, you are getting continuous log messages and you would like to know the...
View ArticleL3 switch block to access vlan gateway ssh and telnet.
hello everyone how to block unauthorize acess of ssh and telnet in juniper ex series .can we block some vlan getway to access ssh and telnet .
View ArticleRe: GRE Tunnel Key on EX4300
The "key" knob is not supported on EX4300. Please see here: https://www.juniper.net/documentation/en_US/junos13.3/topics/reference/configuration-statement/key-edit-interfaces.html If this worked for...
View ArticleRe: Log message entries
The messages are harmless and they will be removed starting with 14.1X53-D40. See this: https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR1107434=====If this worked for you please...
View ArticleRe: QFX5100 request slice alternate
No, you won't see the message regarding the backup partition. For the snapshot, see here:...
View ArticleRe: L3 switch block to access vlan gateway ssh and telnet.
What are you trying to do? To block ssh/telnet traffic destined to the switch itself or the transit ssh/telnet traffic?=====If this worked for you please flag my post as an "Accepted Solution" so...
View ArticleIssues with firewall filter on Juniper EX4550
Hi. I want to limit incomming ssh conection to switch on public IP addresses. To do this I created a firewall family inet filter and aplled it on loopback interface (route engine). admin@4550-1# show...
View Articleirb .vs l3-interface
We have the following config working on EX2200, but now we have EX2300, which requires irb instead of l3-interface data.Can someone show me what lines to change to make the config work on an EX2300....
View ArticleRe: ae11 inactive - how to activate again
Thank You for clarification. I was trying to add one extra interfaces to ae11 however I have this error: error: xSTP configuration disallowed on interface ge-1/0/25 as it is part of an aggregate...
View ArticleRe: irb .vs l3-interface
Hi, Lines that need to be adapted are: vlan irb { unit 0 { family inet { address 10.100.75.10/24; } } }vlans { default { l3-interface vlan.0 irb.0; }...
View ArticleRe: ae11 inactive - how to activate again
Hi, The error is about the interface configured for stp and part of a LAG.You may need to delete that interface from rstp:delete protocols rstp interface ge-1/0/25Cheers,Ashvin
View ArticleRe: Issues with firewall filter on Juniper EX4550
Hi, Is the vlan interface the first hop on which the traffic hits the RE? Or it hits another interface on same device and the routes to vlan interface? Cheers,Ashvin
View ArticleQFX5200: issu yes or no?
Hi, I'm right now testing a couple of QFX5200 in the lab to put them into production later as a L2/L3 device. Regarding the datasheet, the device actually does support (T)ISSU for seamless upgrades:...
View ArticleRe: QFX5200: issu yes or no?
ISSU is not supported yet on QFX5200: https://pathfinder.juniper.net/feature-explorer/issu.html You could open a case to have the datasheet corrected.=====If this worked for you please flag my post as...
View ArticleRe: Issues with firewall filter on Juniper EX4550
Yes, vlan interface is the first hop. Also we have a lot of different Juniper equipment MX, SRX, EX and only this switch is affected to this problem. If your need some more information / config,...
View Article