Quantcast
Channel: All Ethernet Switching posts
Viewing all articles
Browse latest Browse all 10307

Re: EX 2200 switch with EX-1FE-FX SFP module

$
0
0

Thank You for your answer!

 

Unfortunately, no connection on ge-0/1/0 port - LEDs not blinkig.

Her it is port config:

root@SW-01> show configuration interfaces ge-0/1/0
ether-options {
    no-auto-negotiation;
    no-flow-control;
    link-mode full-duplex;
    speed {
        100m;
    }
}
unit 0 {
    family ethernet-switching;
}

and  monitor ountut:

SW-01                             Seconds: 19                  Time: 16:04:05
                                                         Delay: 21/0/31
Interface: ge-0/1/0, Enabled, Link is Down
Encapsulation: Ethernet, Speed: 100mbps
Traffic statistics:                                              Current delta
  Input bytes:                         0 (0 bps)                           [0]
  Output bytes:                        0 (0 bps)                           [0]
  Input packets:                       0 (0 pps)                           [0]
  Output packets:                      0 (0 pps)                           [0]
Error statistics:
  Input errors:                        0                                   [0]
  Input drops:                         0                                   [0]
  Input framing errors:                0                                   [0]
  Policed discards:                    0                                   [0]
  L3 incompletes:                      0                                   [0]
  L2 channel errors:                   0                                   [0]
  L2 mismatch timeouts:                0  Carrier transitions:             [0]

Interface warnings:
  o Outstanding LINK alarm



Viewing all articles
Browse latest Browse all 10307

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>