Re: EX 2200 switch with EX-1FE-FX SFP module
Hello, Here is the list of supported SFPs on EX2200. http://www.juniper.net/documentation/en_US/release-independent/junos/topics/reference/specifications/optical-interface-ex2200-support.html EX-1FE-FX...
View ArticleRe: EX 2200 switch with EX-1FE-FX SFP module
Hi!But EX2200 doesn't have FE ports. Or I can switch SFP ports from GE to FE mode?
View ArticleRe: EX 2200 switch with EX-1FE-FX SFP module
The optics are supported on the EX2200 as long as it is NOT the "C" model and based on your output it looks like you are good there. The output shows that 3 optics are recognized and online. the output...
View ArticleRe: EX 2200 switch with EX-1FE-FX SFP module
Thank You for your answer! Unfortunately, no connection on ge-0/1/0 port - LEDs not blinkig.Her it is port config:root@SW-01> show configuration interfaces ge-0/1/0 ether-options {...
View ArticleRe: EX4200 Port Security
You can see the working configuration and build your plan accordingly. xx@swtaq> show configuration protocols dot1xauthenticator { authentication-profile-name ex_radius; no-mac-table-binding;...
View ArticleRe: EX 2200 switch with EX-1FE-FX SFP module
Can you remove two of these from their VLAN put them into two different new VLANs and connect the ports together. This can then verify that you get the normal link up for the modules. If this works...
View ArticleTurning on 3300 & 4300 switches without unplugging power cable
Experts, I am wonder if after request system halt is any way to turn on back a switch without unpluging power cable and plugging it back. Was looking on the LCD and buttons but did not find anything....
View ArticleRe: Turning on 3300 & 4300 switches without unplugging power cable
After "> request system halt " please enter space or enter button then switch will restart it again.
View ArticleRe: Turning on 3300 & 4300 switches without unplugging power cable
Hello Well my plan is to shutdown the switch / virtualichasis using request system halt and my understanding is the switch will go down then for example after 12 hours I would like to power it on - but...
View ArticleRe: Turning on 3300 & 4300 switches without unplugging power cable
I don't have the ex3300 or ex4300 but other models I use the power-off command and the front panel button to power back on as you describe.
View Articlefirewall filter based ip address and port
hi all we just bought a bunch of 3200 switches. we need to block traffic based on source/destination address (between vlans) and ports. but it seems only the mac filtering working. any special...
View ArticleRe: firewall filter based ip address and port
You can use ip address and port as firewall filter criteria. The requirements are where to apply the filter based on what type of interface you are doing the evaluation of the filter. It sounds like...
View ArticleRe: QFX 5100 Unstable even after latest version
Hey, We are experiencing the same problems. We have a QFX5100 VC consisting of four members. Currently, it behaves fairly unstable and we already had to reload it. We could ping servers connected to it...
View ArticleIP Accounting?
Do EX switches have some equivalent to Cisco's "ip accounting" function?
View ArticleRe: IP Accounting?
You can do something similar to ip accounting basic by using firewall filters there the only terms are "count" and you setup the counter names that you would like to monitor. You apply the filter to...
View ArticleClik here to view.
Re: EX4550-32T and VCP
thanks for this information that I had missedmost of documents related to VCP Uplink ports refer "optical ports" for these ports. other associated questions related to the fact that you can aggregate 2...
View Articlesrx1500 HA Control Port
Hello,due to SRX650 end of sale, we had to lately order 2 SRX1500;those SRX1500 have a dedicated HA Control port with is SFP based so, apparently 1G Copper of Fiber based on the GBIC you order; so, for...
View ArticleRe: srx1500 HA Control Port
The hardware guide for the SRX1500 shows that the HA port is a standard 1G SFP port and not an SFP+ port, so 10G would not be supported. Table 3 / Item #11 page 7...
View ArticleRe: EX 2200 switch with EX-1FE-FX SFP module
Good day!I'm sorry for long time absence .Steve, I did everything that you wrote and I have not any positive results - interfaces still doesn't work. I capture messages from /var/log/messages.log when...
View ArticleRe: EX 2200 switch with EX-1FE-FX SFP module
These seem to indicate that the fiber is connected backwards, low receive power means that no light is incoming from the other interface. Feb 6 16:10:07 SW-01 chassism[1223]: link 0/1/1 SFP receive...
View Article