We have two EX4500s in a virtual chassis setup
We have two vlans that both have routed vlan interfaces
We would like to be able to route between these two vlans using jumbo frames
Can this be done and if so how?
We do have MTU set for 9216 for the interfaces that make up the vlan. Here is how the vlan is configured, notice the MTU of 1500
root@Core> show interfaces vlan.123
Logical interface vlan.123 (Index 94) (SNMP ifIndex 803)
Flags: Up SNMP-Traps 0x0 Encapsulation: ENET2
Input packets : 25554
Output packets: 21219
Protocol inet, MTU: 1500
Flags: None
Addresses, Flags: Is-Preferred Is-Primary
Destination: 10.121.123/24, Local: 10.121.123.1, Broadcast: 10.121.123.255