multicast & lsi interface
I'm having trouble following a multicast stream once the "show multicast route instance XXX group xxx.xxx.xxx.xxx" shows a lsi interface as the upstream interface. Pleas help me understand how to...
View ArticleRe: ex3400 ip-source-guard?
I doubt very much this gets into 17.1, as a lot going on with this release, and extra test burden may be too much. I believe PLM is trying to get this into 17.2.
View ArticleJumbo frames between vlans
We have two EX4500s in a virtual chassis setupWe have two vlans that both have routed vlan interfacesWe would like to be able to route between these two vlans using jumbo framesCan this be done and if...
View ArticleRe: multicast & lsi interface
Hi, The lsi is a Label Switched Interface which indicates this is NG-MVPN. Cheers,Ashvin
View ArticleRe: multicast & lsi interface
Ashvin, Thanks for the info. So if I do a "show mvpn instance xxxxx" I get: sturner@111-P1-CNR03-RE0> show mvpn instance BOVESPA-csp | match 233.252.9.89 0.0.0.0/0:233.252.9.89/32 RSVP-TE...
View ArticleRe: file copy source dest; show system storage shows plenty of space; yet 'no...
I think it tries to pull it first to a temp file. And a path in /var/home corroborates that because 65% of 95 MB = 61.75 MB = free space on the /var mount point. As a workaround, I'd suggest starting a...
View ArticleRe: file copy source dest; show system storage shows plenty of space; yet 'no...
Agreed. Accessing literal shell and leveraging the client there is best..
View ArticleRe: Jumbo frames between vlans
Hi HendersonYou have the set the max MTU value globally using the below mentioned command, this command will apply for all VLANs and then if required change the MTU for other VLANs.If Global MTU size...
View ArticleRe: file copy source dest; show system storage shows plenty of space; yet 'no...
if you navigate to /var/tmp and copy is it still failing. It should ot fail then.
View ArticleRe: ex3400 show route output
Hi cordcscottThere is already a bug reported for this and it is fixed in version 15.1X53-D55. Kindly wait for the image to be available.ThanksArul
View ArticleRe: VLAN popping, pushing and/or swapping operation
HI, I am sending you an example of config below QinQ ELS Configs+------------------+ +------------------+ +--------------------+ +--------------------+| EX2200 +---------+ QFX-5100 +---------+ EX3300...
View ArticleRe: Jumbo frames between vlans
I set the gloabl MTU per your command and that worked fine. I then tried setting the MTU for vlan 123 and I get the message "Family MTU is too large relative to device MTU error: configuration...
View ArticleRe: Jumbo frames between vlans
1. Set the Global MTU to 92162. Commit3. Set the VLAN 123 MTU to 92004. CommitIs this the step you followed ?
View ArticleRe: Jumbo frames between vlans
That is correctI think I am set though. I was trying to get jumbo frames working between an interface on a physical windows servers and the management interface on one of my ESXi hosts. A ping with...
View ArticleRe: Diagnosing outage at same time every day
Hi, Do you have the same problem even now. Please do the command monitor interface traffic on the cli to check if there are any unwanted traffic coming in to the switch all of a sudden. thanks,Ramesh.G
View ArticleRe: Diagnosing outage at same time every day
The problem still happens, but I noticed it's not at exactly the same time (but close) and it doesn't happen every day. It's hard to be on an edge switch to gather traffic because I don't know which...
View ArticleDHCP Snooping issues on EX4200
Hello, I have an EX4200 (L3) with multiple vlans and a dhcp server attached to port 0/0/1 and a cisco 2960 access switch connected to port 0/0/48. I have vlans 5, 6 and 10 defined ob both switches....
View ArticleRe: DHCP Snooping issues on EX4200
Hi, Can you please tell what version of code you are running on the 4200. -Ramesh.G
View ArticleRe: Diagnosing outage at same time every day
Hi, I would like to suggest the following points. 1. need to check if your STP is stable and converging fine, how to check this, run the command, show spanning-tree bridge on all the switches in your...
View Article