Re: VLAN popping, pushing and/or swapping operation

HI,

I am sending you an example of config below

QinQ ELS Configs

+------------------+ +------------------+ +--------------------+ +--------------------+
| EX2200 +---------+ QFX-5100 +---------+ EX3300 +---------+ EX2200 |
| | | | | | | |
+----------------0/1/0 0/0/0-------------0/0/23 0/1/0-----------------0/0/0 0/1/0-----------------+
+

EX2200

root@2200-Left> show configuration vlans
v200 {
vlan-id 200;
interface {
ge-0/1/0.0;
}
l3-interface vlan.200;
}
vlans {
vlan-id 100;
interface {
ge-0/0/0.0;
ge-0/1/0.0;
}
}

{master:0}
root@2200-Left> show configuration interfaces vlan.200
family inet {
address 20.20.20.1/24;
}

QFX5100

root@5100# show interfaces ge-0/0/0
flexible-vlan-tagging;
encapsulation extended-vlan-bridge;
unit 4000 {
vlan-id-list 100-200;
input-vlan-map push;
output-vlan-map pop;
}

{master:0}[edit]
root@5100# show interfaces ge-0/0/23
flexible-vlan-tagging;
encapsulation extended-vlan-bridge;
unit 4000 {
vlan-id 4000;
}

{master:0}[edit]
root@5100# show vlans
Svlan {
interface ge-0/0/23.4000;
interface ge-0/0/0.4000;
}

EX3300

"root@3300# show interfaces ge-0/1/0
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members 4000;
}
}
}

{master:0}[edit]
root@3300# show interfaces ge-0/0/0
unit 0 {
family ethernet-switching {
port-mode access;
vlan {
members 4000;
}
}
}

{master:0}[edit]
root@3300# show vlans
Svlan {
vlan-id 4000;
##
## Warning: requires 'dot1q-tunneling' license
##
dot1q-tunneling {
customer-vlans 100 200;
layer2-protocol-tunneling {
all;
}
}
}

{master:0}[edit]
root@3300# show ethernet-switching-options
dot1q-tunneling {
ether-type 0x8100;
}
storm-control {
interface all;
}

EX2200

root@2200-Right# show interfaces ge-0/1/0
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members all;
}
}
}

[edit]
root@2200-Right# show vlans
v200 {
vlan-id 200;
l3-interface vlan.200;
}

[edit]
root@2200-Right# show interfaces vlan.200
family inet {
address 20.20.20.2/24;
}

Thanks

Partha