Admin VLAN not working in access ports. (EX3300)

Hey Guys, 

Hope everyone is well in these holidays. Currently I faced a problem with my EX3300 running 12.3R6.6.

For some reason If I assign an Access Port to the Admin VLAN (Same Vlan used OOB for mgmt of all devices)  the port doesnt let the traffic pass. 

In this example I set as the Admin Vlan, Vlan 1 and set the port in the following way

set interfaces ge-0/0/19 description TEST
set interfaces ge-0/0/19 unit 0 family ethernet-switching port-mode access
set interfaces ge-0/0/19 unit 0 family ethernet-switching vlan members ADMIN_VLAN <<<<< Vlan 1

If I set any other VLAN. Works like a Charm.

I set a Laptop with an Ip from the Vlan and it doesnt let me pass the traffic. 

However. Testing it with a Cisco 3950 It does work. Any missing config that I am not setting up or any known Bug for this?

Thanks