Re: ksyncd_select_control_plane_proto error
Do you have any routing-engine failure? Please check for any communication issue between all routing-engines.
View ArticleRe: EX4550 - Hashing - LAG
Thanks rccpgm what you are saying makes sense and i'm now thinking is the case, but i cant find anything from juniper to state that though. The closest i can find is the below but its not in refernce...
View ArticleClik here to view.
Re: ksyncd_select_control_plane_proto error
Is there a way to test communication? Master RE has not changed so I'm not sure if there are talking
View ArticleRe: VLAN firewall filter issue on EX switch
Hi Rushi Thank you for replying I tried create the term allow_srv01_source above term Deny_Access as you suggest with: source-port [ 22 80 ] and destination-address 172.16.100.10/32 but it doesn't...
View ArticleRe: EX4550 - Hashing - LAG
I think the 8 bins was an off-shoot of max links in LAG being 8 for many implementations, but just a guess.
View ArticleRe: VLAN firewall filter issue on EX switch
Hello, Can you try something like this & check? set firewall family inet filter eveo_in term allow_srv01 from source-address 0.0.0.0/0set firewall family inet filter eveo_in term allow_srv01 from...
View ArticleEX switch "Port high non-unicast traffic"
This is on several of our switches, the config is set to storm-control default. For instance on a 10gig SFP port, it exceeds daily. So taking out the default for storm control, would that be a better...
View ArticleRe: EX switch "Port high non-unicast traffic"
Might it not be a better approach to identfiy this traffic and figure out the why? Unknown unicast means someone is sending traffic to a MAC that is not known. Is this unknown MAC a real device?...
View ArticleRe: VLAN firewall filter issue on EX switch
Try this:set firewall family inet filter eveo_in term allow_return-traffic from protocol tcpset firewall family inet filter eveo_in term allow_return-traffic from tcp-establishedset firewall family...
View ArticleRe: VRRP and BFD for subsecond VRRP faiover
Where did you find the specific (link) information that BFD is supported with VRRP? The lowest you can get with VRRP is to use fast interval which allows minumum 100 millisecondsset vrrp-group "#"...
View ArticleRe: VRRP and BFD for subsecond VRRP faiover
In Junos BFD is also supported for OAM ping on LSP tests.
View ArticleJunos Fusion Data Center Technical documentation.
Hi there, I'm looking for QFX based Junos Fusion (Data Center) technical documention and config examples. I can't find them anywhere on Juniper's site. Provider Edge and Enterprise are documented...
View ArticleAdmin VLAN not working in access ports. (EX3300)
Hey Guys, Hope everyone is well in these holidays. Currently I faced a problem with my EX3300 running 12.3R6.6. For some reason If I assign an Access Port to the Admin VLAN (Same Vlan used OOB for...
View ArticleRe: VLAN firewall filter issue on EX switch
Hi Rushi I tried as you suggested and now the dns resolver is working due the source-port 53 allowed. However, any another port the server from IP 172.16.100.10 try to connect to outside network (e.g....
View ArticleRe: VLAN firewall filter issue on EX switch
Hi lyndidon I had already tried but it didn't work Thank you
View ArticleRe: Admin VLAN not working in access ports. (EX3300)
Hello, Can you post the output of command in configuration mode 'show vlans ADMIN_VLAN'? Regards,Rushi
View ArticleRe: VLAN firewall filter issue on EX switch
Hello, You are right. Unfortunately that is the catch here.How many ports your server connects to in the external world? Regards, Rushi
View ArticleRe: VLAN firewall filter issue on EX switch
Unfortunately I can't measure the amount of ports each server on the LAN network need external access because each server from LAN network is a different customer and each one can have different need....
View ArticleRe: VLAN firewall filter issue on EX switch
I tried: --- set firewall family inet filter eveo_in2 term allow_dst_srv01 from source-address 0.0.0.0/0set firewall family inet filter eveo_in2 term allow_dst_srv01 from destination-address...
View ArticleRe: Admin VLAN not working in access ports. (EX3300)
Sure. Its a pretty standart config. Only has the Vlan number and the name hostname# show ADMINISTRATIVA { vlan-id 1;}
View Article