Quantcast
Channel: All Ethernet Switching posts
Viewing all articles
Browse latest Browse all 10307

Re: Juniper switchport configuration

$
0
0

thank You Steve,

 

The output is:

 

show spanning-tree interface ge-0/0/7 detail

Spanning tree interface parameters for instance 0

Interface name : ge-0/0/7.0
Port identifier : 128.520
Designated port ID : 128.520
Port cost : 20000
Port state : Forwarding
Designated bridge ID : 61440.84:b5:9c:37:71:c1
Port role : Designated
Link type : Pt-Pt/EDGE
Boundary port : NA
Edge delay while expiry count : 16
Rcvd info while expiry count : 0

 

This port was down for some time accroding to this log:

 

Jan 23 15:14:21 itroom mib2d[1245]: SNMP_TRAP_LINK_DOWN: ifIndex 516, ifAdminStatus up(1), ifOperStatus down(2), ifName ge-0/0/7
Jan 23 15:14:38 itroom mib2d[1245]: SNMP_TRAP_LINK_DOWN: ifIndex 516, ifAdminStatus up(1), ifOperStatus down(2), ifName ge-0/0/7

 

Unless this is not fully right them I am wrong, but I believe accroding to above the ge-0/0/7 was down at 15:14:21 and 15:14:38 - right? Or that is time from to, but I guess there are two different time where port went down. i have a way more these ports on other IDFs, which are trunk ports for aerohive access points, but also noticed similar log statements on ports computer are connected as well cisco phones. Thank You -Adam


Viewing all articles
Browse latest Browse all 10307

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>