Re: ELS and QinQ and Layer 2 Protocol Tunneling
Nobody owns a functional configuration QinQ and L2TP for ELS JunOS (EX3400)? Thx
View ArticleRe: EX4200 OSPF not working properly
admin@CORPSW01> show route extensive 4.2.2.2 inet.0: 431 destinations, 432 routes (431 active, 0 holddown, 0 hidden) 0.0.0.0/0 (1 entry, 1 announced) TSI: KRT in-kernel 0.0.0.0/0 -> {172.16.1.2}...
View ArticleRe: ELS and QinQ and Layer 2 Protocol Tunneling
Have you tried using the ELS Traslator to convert from your EX2200 config to EX4300 (ELS) config? Translator info found here -...
View ArticleVXLAN/EVPN Data Center Interconnect
Hi, I have the following setup DC1 VXLAN/EVPN DC2 VXLAN/EVPNHostA- QFXB1-------- MXB1 --------------EVPN MPLS ---------------MXB2------QFXB2 - Host B...
View ArticleRe: EX4200 OSPF not working properly
Hi, The default route is an OSPF external Type 2 route hence the interface metrics will be ignored.You could try using an import policy to deny or alter the metric of that route from that specific...
View ArticleJuniper Trunk port with native vlan - Aerohive Access Point looking a way not...
Experts, My configuration for aerohive access point is: show configuration interfaces ge-0/0/20unit 0 { family ethernet-switching { port-mode trunk; vlan { members [ all ]; } native-vlan-id 100; }}...
View ArticleRe: EX4200 OSPF not working properly
Ashvino, I see what you mean, do I delete all the ospf statements currently in the switch, then just use the policy.? Can you add in the policy the other two interfaces, ge-0/0/1 and ge-1/0/39 as the...
View Articlevlan memeber convention
I am looking if I do something wrong: my vlans are named v1 tag 1 v10 tag 10 v30 tag30 then in my trunk I can either use v1 v10 v30 or 1 20 30 as vlan members? I use just tags vlan member [ 1 10 30]...
View ArticleRe: Juniper switchport configuration
When dealing with just port description is not a big deal, since they are missing description. But I have found out these are not the data / voice port issues only. I have noticed all my Aerohive...
View ArticleRe: Juniper switchport configuration
thank You Steve, The output is: show spanning-tree interface ge-0/0/7 detailSpanning tree interface parameters for instance 0Interface name : ge-0/0/7.0Port identifier : 128.520Designated port ID :...
View ArticleRe: Juniper switchport configuration
The flavour is RSTP not "STP" - sorry for typing error
View ArticleRe: vlan memeber convention
Good to go, but as a best practice, it is recommended not to use tag 1 since this is used by Cisco devices, but if no Cisco devices in your network, then good to go. You can use vlan names or IDs just...
View ArticleRe: Juniper switchport configuration
Any ID you specify as native-vlan-id will be untagged. So it seems like you need do some consolidation. You can list one native-vlan-id either 70 or 1. So the devices which are sending untagged traffic...
View ArticleRe: Juniper Trunk port with native vlan - Aerohive Access Point looking a way...
if this is related to your other question, you may want to keep them together. Seems like you now have native v lans 1, 100 and 70. you can only have one native vlan which is untagged on the trunk port.
View Articlevqfx10k-pfe is not starting
Hi all,I have an issue that I hope you can help me with.The vqfx-pfe software will not start, RE part works perfect.The only thing that happen is following @vqfx-10000:~/vqfx10k-vagrant/full-2qfx$...
View ArticleRe: vqfx10k-pfe is not starting
Hi folks,What is the CPU and memory resources added to the VM? How many wan interfaces are added to the pfe?
View ArticleRe: vlan memeber convention
Hi Folks, Please find the Syntax, i hope this helps members [(all | names | vlan-ids)];Hierarchy Level [edit interfaces interface-name unit logical-unit-number family ethernet-switching vlan]Release...
View ArticleRe: vqfx10k-pfe is not starting
Hi,Thanks for the quick response. I'm using junipers standars setup for the moment (full-1qfx or full-2qfx) @vqfx-10000:~$ lscpuArchitecture: x86_64CPU op-mode(s): 32-bit, 64-bitByte Order: Little...
View Article