I can only speak about the EX documentation. it needs cleaned up. The quick start quide is jumbled together, and really it leaves you hanging at the end. About all it does is show how to run the ezsetup. It then says to ssh into the switch and all is good. There is one important thing that stumped me. You have to type "clli". That is not mentioned in any of the documents I have read (This is for the EX 3400). The documentation doesn't do a good job of specifying what is part of the command and what the user needs to input. The documentation is also very broken up. There is not complete manual that give's detailed information about configuring the switch. I'm working on figuring out how to create vlans with Juniper. I found 3 different documents and none of them got me where I needed to be. The way JunOS works is so different then IOS. The thought pattern with it needs to be well explained.
↧