QFX10k disable port 0 & 2 when port 1 is 100g

Hello,

I'm using Ansible to configure my QFX10k.

I've got an error when I configure my ports in 100g :

fatal: [SD-SRV-C012-1]: FAILED! => {"changed": false, "failed": true, "msg": "Unable to load config: ConfigLoadError(severity: warning, bad_element: None, message: warning: Port 24 and 26 will be disabled or enabled when port 25 in 100g mode is enabled or disabled\nwarning: Port 27 and 28 will be disabled or enabled when port 29 in 100g mode is enabled or disabled\nwarning: Port 30 and 32 will be disabled or enabled when port 31 in 100g mode is enabled or disabled\nwarning: Port 33 and 34 will be disabled or enabled when port 35 in 100g mode is enabled or disabled)"}

In my template, I just configured the port to 100g:

set chassis fpc 0 pic 0 port 25 speed 100g
set chassis fpc 0 pic 0 port 29 speed 100g
set chassis fpc 0 pic 0 port 31 speed 100g
set chassis fpc 0 pic 0 port 35 speed 100g

I've tried to disable port 24 and 26:

set interfaces et-0/0/24 disable
set interfaces et-0/0/26 disable

The problem is the same.

How can I disable this ports in CLI ?

Thank you