Re: VC-Ports on QFX5110
Is junos 17.3 still on track to be release at the end of august. We're experiencing similar issue and was wondering whenit should come out
View ArticleClik here to view.
who controls redundancy? ae on EX4550 to reth SRX1400
hi there, Sorry if this has been answered somewhere, but I've searched high and low without a clear cut answer. We have a setup of two AE links (both with a single 10g member, configured as trunks)...
View ArticleRe: who controls redundancy? ae on EX4550 to reth SRX1400
"It's my understanding that AE will load balance across links, essentially behaving in an active/active state, where as reth traffic is more active/passive behaviour. " => not 100% accurate I assume...
View ArticleRe: who controls redundancy? ae on EX4550 to reth SRX1400
Hi there, Thanks a lot for the detailed response, you've answered the question for me in that the SRX will control the active/passive state of the two LAGs in our setup. The only thing I'm wondering...
View ArticleRe: who controls redundancy? ae on EX4550 to reth SRX1400
RG0 is special and is always associated with the Control Plane - whether Node 0 or Node 1 RE is Primary (Master) or Secondary. Sync will happen across the Fabric Link. Other RG's are associated with...
View ArticleOverlapping subnet is configured under irb ERROR
EXISTINGset interfaces irb unit 1 family inet address 10.205.35.115/24CHANGE REQUIREDset interfaces irb unit 1 family inet address 10.205.35.115/25STEPS FOLLOWEDdelete interfaces irb unit 1 family inet...
View ArticleRe: Overlapping subnet is configured under irb ERROR
delete interfaces irb unit 1 family inet address 10.205.35.115/24commitset interfaces irb unit 1 family inet address 10.205.35.115/25commit
View ArticleRe: Overlapping subnet is configured under irb ERROR
Can you show everything currently on the irb unit 1 before and after the change? show interfaces irb unit 1
View ArticleQFX10k disable port 0 & 2 when port 1 is 100g
Hello, I'm using Ansible to configure my QFX10k.I've got an error when I configure my ports in 100g :fatal: [SD-SRV-C012-1]: FAILED! => {"changed": false, "failed": true, "msg": "Unable to load...
View ArticleRe: QFX10k disable port 0 & 2 when port 1 is 100g
Hi, This is an ansible issue. you'll always get these warning on 10k. https://github.com/Juniper/ansible-junos-stdlib/issues/201
View ArticleRe: QFX10k disable port 0 & 2 when port 1 is 100g
Hi, thank you for you time.So I can't ignore this warning for the moment ?
View ArticleRe: EX 2200 switch with EX-1FE-FX SFP module
Hi, Alex, we solved the issue as soon as we've used genuine or 100% compatible SFPs. I'm talking about 100M-LX, but it's doesn't make any difference I'sure. The switch running Junos 15.1R5.5, but...
View Article2 members Virtual chassis traffic handling
Hi all, I 've tested 2 x EX4300 formed as virtual chassis in order to increase the port density but it seems not work, as we all know, one switch will be the master and other will be backup under...
View ArticleRe: 2 members Virtual chassis traffic handling
You have no interfaces configured for the new switch. set interfaces ge-1/0/0 unit 0 family ethernet-switching storm-control default set interfaces ge-1/0/1 unit 0 family ethernet-switching...
View ArticleStrange log messages in EX2300
Hello! I have brand new EX2300-48. After basic configuration I've notice a strange lines in message logs: fpc0 PFESVCS: Input IFL not found dc-pfe: PFESVCS: Input IFL not foundThey appear in log...
View ArticleRe: Strange log messages in EX2300
Input IFL not foundhttps://kb.juniper.net/InfoCenter/index?page=content&id=KB2820 See if tht helps.
View ArticleRe: 2 members Virtual chassis traffic handling
To expand on what Smicker notes, when you join another switch to the VC the ports on that switch have a new first number (the FPC) changing from:ge-0/0/0 to ge-1/0/0And so on for all the ports. There...
View ArticleRe: Strange log messages in EX2300
Can you confirm that all the configured interfaces exist. And all the physical interfaces have a configuration. I think this occurs when there is a mismatch between hardware and configuration.
View Article