Hello,
First i will summarize the network.
We got a new client (hospital) with juniper hardware. Our company has little experience with Juniper so i got the job to figure it out and find solutions. With me being fairly new to IT and networking i would rather ask than google everything.
So here goes, network consists of 14 EX series switches with a stack virtual chassis that does all the routing. Current setup is a mess with no documentation (previus IT did this and left).
We need to reconfigure all the switches while everything has to be live since it is a hospital.
Now my main question is we have 40 clients in this network that should be in it own VLAN and only have access to the server (easy to achieve no problem). But they should not be able to have traffic between them in any case (security reasons/client demand). Now i know PVLAN`s are one way to solve this, but here is the thing all those 40 clients have VoIP enabled and its all on one port because the infrastructure is a hellhole.
Can i solve this in any other way else than just putting every client in separate VLAN.
Thank you for your help.
Regards Dean.