EX - QinQ on trunk interface
Hello All, I hope you are doing well. I have a question regarding Juniper EX4200. I have an EX4200 with two port-mode trunk interfaces:- one facing the customer where I receive many different vlans...
View ArticleRe: ex4300 vs ex4200 reachability through bridge
Hi,May be u need change your config using bridge domain like mx style.
View ArticleCopper SFP transceivers (1000BASE-T) Fail Auto-Negotiation on EX4600 VC
I've been confounded by a problem I ran into when I tried to implement LAG between an EX4600 2-member virtual chassis and a Cisco ASA 5525-X (LACP active). I am looking for an explanation of the...
View ArticleClik here to view.
Re: Copper SFP transceivers (1000BASE-T) Fail Auto-Negotiation on EX4600 VC
As for the warning, this applies to use of 10Base-T SFP on any fiber port based product. Since 10Base-T connector is physically larger then standard fiber connectors which makes it physically...
View ArticleEX series isolate vlan members with voip.
Hello, First i will summarize the network. We got a new client (hospital) with juniper hardware. Our company has little experience with Juniper so i got the job to figure it out and find solutions....
View ArticleMulticast VLAN registration (MVR) Config on EX4300
Hello All, Greetings of the Day!!!! Request you to please help me out with implementation of MVR on EX4300. A sample config template will be great if you share.
View ArticleRe: EX series isolate vlan members with voip.
Is the connected device a voip phone that can deliver the computer as untagged and the ip phone as tagged traffic? If yes, then you can configure the untagged vlan as pvlan and the voip tagged vlan...
View ArticleRe: Multicast VLAN registration (MVR) Config on EX4300
Are you looking for this example configuration? https://www.juniper.net/documentation/en_US/junos/topics/example/mvr-ex-series.html
View ArticleRe: EX2300-C 12P - Temperature is extremely hot on this unit. What is a safe...
I don't know what you're expecting from a passively-cooled system; 50-60° C is perfectly fine for modern components. Just because it's not what you personally are used to doesn't make it "excessive".
View ArticleRe: EX - QinQ on trunk interface
Hi,Please refer to below tech pubs for more details in Q in Q Understanding Q-in-Q Tunneling on EX Series Switches Configuring Q-in-Q Tunneling (CLI Procedure) You can also refer to below KB which has...
View ArticleMix Speeds on ae interface
I'd like to temporarily mix 10Gb and 40Gb interfaces on an ae interface during an upgrade--can I safely do this? What do I set link-speed to? --Paul
View ArticleRe: New to JunOS configuration
Hi, Please share the configuration of vlan and the error you are getting.
View ArticleRe: Mix Speeds on ae interface
I guess, link speed mixed is enough. set aex aggregated-ether-options link-speed mixed You can refer to below links for more understanding....
View ArticleRe: Mix Speeds on ae interface
Thanks for the links, unfortunately speed mixed does not appear to be an option on EX.
View ArticleRe: Mix Speeds on ae interface
May i know on which ex switch model are you tyring to configure mixed speed ae?
View ArticleRe: Mix Speeds on ae interface
Mix speed ae is not supported on EX platform as far as i know HTH
View ArticleRe: EX - QinQ on trunk interface
Hello. Thank you for your response. Unfortunately, the links you provide are for basic qinq, and the configuration is also a single qinq vlan on a single interface, which is not the case I described....
View ArticleRe: EX - QinQ on trunk interface
Hi, Have you gone through the KB I have shared? https://kb.juniper.net/InfoCenter/index?page=content&id=KB13544 Let me know what is the difference you have in requirement and the example listed in...
View Article