ok i can see home plate im almost there! but now that the next switch is in i cant change its config at all. if i try and do set interfaces i dont see any of the 1/0/x ports.
root@Juniper-GrackSwtich-1135> show virtual-chassis status
Preprovisioned Virtual Chassis
Virtual Chassis ID: ae35.6205.942a
Virtual Chassis Mode: Mixed
Mstr Mixed Route Neighbor List
Member ID Status Serial No Model prio Role Mode Mode ID Interface
0 (FPC 0) Prsnt TR0214510217 qfx5100-48t-6q 129 Master* Y VC 1 vcp-255/0/52
1 (FPC 1) Prsnt TR0216360075 qfx5100-48t-6q 128 Backup Y VC 0 vcp-255/0/52
and if i do sho interfaces terse i can see the 1/0/0
but there all set to this .161386 subeterface and i can seam to find out how to change the configs on the xe-1/0/0 or any thing on that?
the main swtich is working still great but i just cant get the backup side for configering it all for the same vlan.
THANKS!!!!
Turns out you then have to fully config them
wildcard range set interfaces xe-1/0/[0-47].....