Re: 2 qfx5100 vcf?
ok i can see home plate im almost there! but now that the next switch is in i cant change its config at all. if i try and do set interfaces i dont see any of the 1/0/x ports....
View ArticleRe: 10Gb SFP+ Autonegotiation
Just FYI, I would not trust that link to be 100% accurate across all products. For example, the 10GE interfaces on EX4300 Uplink Module can NOT be set with auto-neg disabled. FYI
View ArticleRe: EX vlan (trunk/access) tagging question
Thank you. Your remarks saved me a lot of time :-)
View ArticleRe: 10Gb SFP+ Autonegotiation
On which device had u ran this command for xe and ge for interfaces?..i guess each device family has different norm for 10g SFP+ flavours..
View ArticleRe: allowed mac address on trunk port EX4550 juniper switch
You can limit the mac learned on trunk ports as follows..https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/port-security-mac-limiting-cli-els.html However you may be able to...
View ArticleEX3300 RVI forwards with dst MAC 00:00:00:00:00:00
Have someone met with the same problem? (see description below...)We run JUNOS 15.1R6.7 on our EX3300 configured as L3 gate for local vlans and particularly for vlan 102 Ex.:my-user@my-ex3300> show...
View ArticleRe: EX3300 RVI forwards with dst MAC 00:00:00:00:00:00
Did you open a TAC case? Without one nothing will change as far as product is concerned. What version of SW are you running on the EX3300? It looks to me like a collision is FDB hash algorthim.
View ArticleRe: EX3300 RVI forwards with dst MAC 00:00:00:00:00:00
Answers:Not yet, but we will.JUNOS 15.1R6.7
View ArticleRe: EX3300 RVI forwards with dst MAC 00:00:00:00:00:00
Not sure if your EX3300 is VC or standalone, and how difficult this might be for you, but if you could downgrade to 12.3R12 and re-test that could be very useful info. Just FYI.
View ArticleRe: EX3300 RVI forwards with dst MAC 00:00:00:00:00:00
Standalone. Downgrade is not possible, there're production servers attached.There is only one affected host. Others works fine!
View ArticleRe: EX3300 RVI forwards with dst MAC 00:00:00:00:00:00
Understand. I don't suppose this server (NIC) was used anywhere previously without issue? Was this EX3300 every running with 12.3 or is this fairly new install? Just wondering, . . .
View ArticleRe: QFX10002-36Q as internet router
+1 If anyone is doing this yet in production would love to get feedback.
View ArticleRe: EX3300 RVI forwards with dst MAC 00:00:00:00:00:00
All server NICs worked without problems on other not-EX3300 TOR switches.The server was attached to EX3300 a couple of weeks ago.The switch was put in prod a month ago:show system uptime | match boot...
View ArticleClik here to view.
Re: EX3300 RVI forwards with dst MAC 00:00:00:00:00:00
OK, thanks. If you can, post case number when you find to open, which I assume now is no longer critical to you -
View ArticleRe: 10Gb SFP+ Autonegotiation
I tested on a QFX5100 running 14.1X53-D26 and you can neither set no-auto nor delete auto-negotiation (as URL states) for 10GE or xe interfaces. See output below:...
View Articleqfx 5100 shuts it self off?
Hey so i have 2 qfx5100 set up in a VC and one of them keeps shutting down every night and i cant see why? lucky theres only one user thats useing it right now. but what i walk in to is a switch with...
View ArticleRe: qfx 5100 shuts it self off?
Log files would be a good start. show log messages | no-more
View ArticleRe: 10Gb SFP+ Autonegotiation
If you don't have autonegotiation configured then of course you will get that error--just as if you tried to delete any other non existant configuration. Enable it, commit, then you can delete it.
View ArticleRe: qfx 5100 shuts it self off?
Hi , - What is the switch model? Is that QFX5100-48T?- I like to check the CPLD version, you may share this command output for that : > show chassis firmware | match “Power CPLD” Regards,Ajo Thomas
View ArticleRe: qfx 5100 shuts it self off?
I would suspect your swtitch is becoming too hot and reaching maximum thermal capacity, under which condition the device will shut itself off. Log files will show you this and if you had Syslog server...
View Article