Hello,
Could you please share your experience configuration QinQ on EX series, I want configure QinQ on EX4200, same as alreday has on my Cisco 3750:
interface GigabitEthernet1/1/2
description eth-local
switchport mode trunk
switchport vlan mapping dot1q-tunnel 111 10 101
!
interface GigabitEthernet1/1/1
description eth-out
switchport trunk allowed vlan 111
switchport mode trunk
!
I could not find anything similar as configure on EX 4200, FW version 12.3R12.4
Thanks in advance.
BR,
Jurijs