Redwave gBic on a EX4600 - ??
We have a EX4600 and are trying to use a 10g Redwave gbic, has anyone tried them before, will they work.? I know the 1g works on our EX2200 switches. Thanks
View ArticleRe: ex2200 vlan and simple l2 router
Hi, What do you mean by L2 router ? I guess you meant by that a simple router (such as linksys) that configured with your ISP DSL/cable to access the internet . If that so then do the following on the...
View ArticleRe: Can't ping my lo0 on switch from computers attached to vlan on that switch.
Thank you for the explanation about directly connected routes. So I TOOK OUT the two staticroutes, 10.0.0.0/24 next-hop 10.0.0.26 and, 10.0.0.240 next-hop 10.0.0.26.robmin@ex2200c# show...
View ArticleRe: Can't ping my lo0 on switch from computers attached to vlan on that switch.
The issue is that your comcast modem is acting as the gateway for your internal network. I recommend you redesign your network around the ex2200 to act as your L3 core router so that you are't relying...
View ArticleRe: Can't ping my lo0 on switch from computers attached to vlan on that switch.
>I recommend you redesign your network around the ex2200 to act as your L3 core router. Thanks smicker. I like this idea the most smicker (is this capitolized or lower case?), it seems that I would...
View ArticleRe: Redwave gBic on a EX4600 - ??
Juniper will only directly support their own branded optics. For third party optics you need to look to the vendor website for their support polcies on the particular equipment. Looking at the Red...
View ArticleRe: Redwave gBic on a EX4600 - ??
Hey Spuluka, long time no see.. Thas is Robin Hood. I was wondering if you could take a look at my post about not being able to ping my lo0, at the end where i ask about layer 3 logic and the loopback....
View ArticleJuniper EX4200 QinQ
Hello,Could you please share your experience configuration QinQ on EX series, I want configure QinQ on EX4200, same as alreday has on my Cisco 3750:interface GigabitEthernet1/1/2description...
View ArticleRe: show interface description JWEB failed
show version Hostname: ex3200-48-1.***.ru Model: ex3200-48t Junos: 15.1R3.6 JUNOS EX Software Suite [15.1R3.6] JUNOS FIPS mode utilities [15.1R3.6] JUNOS Online Documentation [15.1R3.6] JUNOS EX 3200...
View ArticleRe: Juniper EX4200 QinQ
This is an example configuration for using QinQ on EX series switches. http://www.juniper.net/techpubs/en_US/junos11.4/topics/example/qinq-tunneling-ex-series.html
View ArticleRe: Can't ping my lo0 on switch from computers attached to vlan on that switch.
I am a little confused by the discussion. This seemed to be talking about making due with some limitations on the cable modem firewall provided for home services using multiple VLANs on an ex switch....
View ArticleRe: Can't ping my lo0 on switch from computers attached to vlan on that switch.
Spuluka, thanks for you response! I really appreciate it. The situation with the modem and firewall and multiple vlans was just a reference to a situation that I wanted to try to avoid in this current...
View ArticleVirtual Chassis with two EX2200 no network access at backup switch
Hi all,I configured a Virtual Chassis with two EX2200 switches. The master switch was already in use and I added the backup switch to the rack. I have used the uplink ports 0 and 1 at both switches to...
View ArticleClik here to view.
vstp on ex4600
Hi all,I am trying to configure rstp on vlan all on ex4600 but showing the sysntax error.But in ex4500 or ex4200 I am able to execute this command. #set protocols vstp vlan allFind the attached screen...
View ArticleRe: Virtual Chassis with two EX2200 no network access at backup switch
You will need to check your interface configuration for the second set of switch ports. When you create a virtual chassis the interface numbering increases the FPC number on the interface for the new...
View ArticleRe: Can't ping my lo0 on switch from computers attached to vlan on that switch.
In addition to setting the layer 3 interface on vlan 400, you also need to configure the ip address on this interface you want to use. And to have this as your core, you will need the devices and...
View ArticleRe: Virtual Chassis with two EX2200 no network access at backup switch
This is how the ports look like. I think this is ok or not? <interface-name> Name of physical or logical interface vcp-255/1/0 vcp-255/1/0.32768 vcp-255/1/1 vcp-255/1/1.32768 ge-0/0/0 ge-0/0/0.0...
View ArticleRe: Can't ping my lo0 on switch from computers attached to vlan on that switch.
Thanks Spuluka, I had already set interfaces vlan unit 400 family inet address 10.0.0.26/24, and this interface is pingable by any device in the vlan. Are you saying that it makes a difference if the...
View ArticleRe: vstp on ex4600
Your situation is because EX4600 uses ELS. Not sure what SW release you are using, but VLAN ALL may not be an acceptable command. If you try for s specific VLAN does it work? I can not read your...
View Article