Hello all,
I have a working Cent OS server that is giving out dhcp and is also acting as a ftp server. ZTP works as it should on EX-2200 switches but something is off when I try to perform the same process on s EX-2300. Has anyone experienced anything similar? Only thing I can think of is the Software difference. Any info on this is greatly appreciated.
I manually changed the date and time on the switch but I am still getting a error:
Auto Image Upgrade: Tried [2] attempts to fetch "file_name".txt file from s erver x.x.x.x through vme. Summary: "Failed to change directory.". To ret ry [4] times.
and it seems to see the server
Auto Image Upgrade: DHCP Options for client interface vme.0 ConfigFile: /configs/ex2300/file_name.txt ImageFile: /image/ex2300/junos-arm-32-15.1X53-D58.3.tgz Gateway: x.x.x.x DHCP Server:
x.x.x.x File Server: x.x.x.x Options state: All options set
Auto Image Upgrade: Active on client interface: vme.0
Auto Image Upgrade: Interface:: "vme"
Auto Image Upgrade: Server:: "x.x.x.x"
Auto Image Upgrade: Image File:: "junos-arm-32-15.1X53-D58.3.tgz"
Auto Image Upgrade: Server File:: "file_name.txt"
Auto Image Upgrade: Gateway:: "x.x.x.x"
Auto Image Upgrade: Protocol:: "ftp"
Its very strange as my ZTP server works with ex-2200.
Any ideas on why this would happen? Do I need a Network Director in order for this to work? I spent 3 hours with JTAC on the phone with no solution, just trying to figure out if it is possible to do without Network Director.
I have a working Cent OS server that is giving out dhcp and is also acting as a ftp server. ZTP works as it should on EX-2200 switches but something is off when I try to perform the same process on s EX-2300. Has anyone experienced anything similar? Only thing I can think of is the Software difference. Any info on this is greatly appreciated.
I manually changed the date and time on the switch but I am still getting a error:
Auto Image Upgrade: Tried [2] attempts to fetch "file_name".txt file from s erver x.x.x.x through vme. Summary: "Failed to change directory.". To ret ry [4] times.
and it seems to see the server
Auto Image Upgrade: DHCP Options for client interface vme.0 ConfigFile: /configs/ex2300/file_name.txt ImageFile: /image/ex2300/junos-arm-32-15.1X53-D58.3.tgz Gateway: x.x.x.x DHCP Server:
x.x.x.x File Server: x.x.x.x Options state: All options set
Auto Image Upgrade: Active on client interface: vme.0
Auto Image Upgrade: Interface:: "vme"
Auto Image Upgrade: Server:: "x.x.x.x"
Auto Image Upgrade: Image File:: "junos-arm-32-15.1X53-D58.3.tgz"
Auto Image Upgrade: Server File:: "file_name.txt"
Auto Image Upgrade: Gateway:: "x.x.x.x"
Auto Image Upgrade: Protocol:: "ftp"
Its very strange as my ZTP server works with ex-2200.
Any ideas on why this would happen? Do I need a Network Director in order for this to work? I spent 3 hours with JTAC on the phone with no solution, just trying to figure out if it is possible to do without Network Director.