Hello,
"next-ip" and "next-interface" are supported on MX-series only
next-interface interface-name | (MX Series) Direct packets to the specified outgoing interface. |
|
next-ip ip-address | (MX Series) Direct packets to the specified destination IPv4 address. | family inet |
You can do it with "then routing-instance BLAH" action but redirecting towards connected subnets that were leaked between instances is not supported: https://kb.juniper.net/InfoCenter/index?page=content&id=KB23027
In other words, if 200.200.200.2 is resolved via connected subnet, then You have to jump through additional hoops to make this happen. You can find numerous posts on this forum discussing this exact thing.
HTH
Thx
Alex