Re: Warning: configuration block ignored: unsupported platform (ex4200-48px)
community public { authorization read-only;}#### Warning: configuration block ignored: unsupported platform (qfx3000-g)##traceoptions { file world-readable; flag pdu; flag all;} Same question , why...
View ArticleEX4200 + Cisco Catalyst 2960 + Cisco IP Phone CP7861 (SIP) can't obtain IP...
Hi, everybody! We have next scheme: Cisco IP Phone connected to the Cisco Catalyst 2960 by access port (with voice and data vlans).Cisco Catalyst 2960 connected to the Juniper EX4200 by trunk port...
View ArticleEX9204: MC-LAG
Hello Experts, I have a pair of EX9204s configured with a MC-LAG. It's all working fine. Now I need to add a new VLAN and associated irb interface to configuration in both the switches. I am planning...
View ArticleRe: QoS/CoS not getting certain packets
Hi,Can you please share below output:>show class-of-service classifier type dscp name CLASSIFIER-DSCP //RegardsAD
View ArticleRe: QoS/CoS not getting certain packets
Hello, wrote: I can test packets going to many of the other queues successfully, but my TOS 96/104 will not go to FC-VC (queue 1). I'm doing the PING on same switch You need to set FC for...
View ArticleEX 4300 and Filter based routing question
Hi everyone, We want our EX 4300 to send all traffic sourced from 199.199.199.1/32 , received on f0/0 , to next hop 200.200.200.2 On EX 4300, is following possible? set firefall family inet filter...
View ArticleRe: EX 4300 and Filter based routing question
You need to create a routing instance for the forwarding. the procedure is outlined here....
View ArticleRe: EX 4300 and Filter based routing question
Hello,"next-ip" and "next-interface" are supported on MX-series onlyhttps://www.juniper.net/documentation/en_US/junos/topics/reference/general/firewall-filter-actions-nonterminating.html next-interface...
View ArticleRe: EX9204: MC-LAG
I don't expect to see any issues. The mc-lag consistency check would us if there is something that is not configured as desiged between peers. You can refer the following for more...
View ArticleHow do I assign IP addresses to each of my VLANs?
Forgive me, I'm very new to JunOS. On ArubaOS I was able to assign IP addresses to VLANs like this:#vlan 100(vlan100)#ip address 172.16.4.3 netmask 255.255.255.0(vlan100)#exit#vlan 200(vlan 200)#ip...
View ArticleRe: How do I assign IP addresses to each of my VLANs?
Hi Ninjai, A vlan on a juniper switch is its own boadcast domain. It groups all devices into a specific (vlan) group as per the vlan membership of the interface on the switch through which the devices...
View ArticleHow do i configure an ACL for SSH on Ex4200 Switch
I am trying to configure this ACL for juniper using SET commands but need assistance if anyone can help with the right set commands. access-list 97 permit 10.3.10.0/24;access-list 97 permit...
View ArticleRe: How do i configure an ACL for SSH on Ex4200 Switch
There are couple of ways..Here is one sample using firewall filter: set policy-options prefix-list SSH 10.2.8.0/26set policy-options prefix-list SSH 10.3.10.0/24set firewall family inet filter SSH term...
View ArticleRe: Creating a VTY ACL
Thanks but i am still confused. I want to allow access to the switch by only a few select subnets, not just 1 subnet as access is needed by VPN as well as other applications and services. Thats why...
View ArticleRe: How do i configure an ACL for SSH on Ex4200 Switch
Thank you. what do you mean by set interfaces ? i would only allow access to ssh/telnet from a group of ip addresses. similiar to what i do on a vty for cisco.
View ArticleEX 3400 Virtual Chassis DHCP relay stops working
Afternoon I have a pair of EX3400's, one PoE and one non-PoE connected together in a Virtual Chassis. The switches were installed around 18 months ago and for around 1 year they have been working...
View ArticleRe: Creating a VTY ACL
Thank You, i tried this but the juniper isnt using a loopback interface. can i configure just with VTY line ? I would like to deny based on vty and not interface or loopback. See below is what i...
View Article