Hi,
I currently have an SRX1500 cluster configured and working correcty. However, one of the nodes needs to be relocated to our second data center.
Obviously, this means that I will need to have the dedicated HA Control ports via Layer 2, in my case a QFX5110 cluster at each site.
I have tested via the local QFX5110 cluster but I am not receiving a link light on either control port on either nodes.
The VLANs used on the QFXs are access but when connected, there are no link lights on the control port.
Has anyone created the cluster via L2 and specifically on the SRX1500 with the Dedicated port.
FYI, IGMP Snooping is disabled on the QFX.
Any assistance would appreicated.